Owner's manual

06 Preparation

Installing the Media Receiver vertically

You can use the supplied stand to install the Media Receiver

vertically.

1. Insert the stand into the side of the Media

Receiver.

2. Secure the stand with the supplied screws.

Screws

3. Remove the shock absorbing pads.

Keep the shock absorbing pads and screws. They are re-

quired when you place the Media Receiver in the horizontal

position.

4. Plug the screw holes using the supplied caps.

• When you have installed the Media Receiver verti-

cally, be sure to use the supplied stand. If you place

the unit directly on the floor, the cooling vents will be

blocked, resulting in mechanical failure.

Remove the separation sheet.

Screw hole cap

Align with the

hole and attach.

Right side

Shock absorbing pad