Owner's manual

07 Watching TV

Plasma Display

(right view)

Changing channels

Using P +/– on the remote control unit

• Press P + to increase the channel number.

• Press P – to decrease the channel number.

When viewing Teletext information:

• Press P + to increase the page number.

• Press P – to decrease the page number.

• CHANNEL +/– on the Plasma Display operates the same

as P +/P –.

• P +/P – cannot pick up channels that are set to skip.

Using 0 – 9 on the remote control unit

Select channels directly by pressing buttons 0 to 9.

EXAMPLE

• To select channel 2 (1-digit channel), press 2.

• To select channel 12 (2-digit channel), press 1, followed by

When viewing Teletext information:

View a page directly which is 3-digit page number from 100 to

899 by pressing buttons 0 to 9. See page 43.

• In the standby mode, when you press 0, the power turns on

and the on-screen image comes from the INPUT 1 source.

Or, when you press any button from 1 to 9, a TV image

displays.

CHANNEL +/–

Plasma Display/Media Receiver status indicators

Indicator Status System Status

Plasma Display Media Receiver

POWER ON STANDBY POWER ON STANDBY

Power to the Plasma Display and Media Receiver is off. Or the power

cords have been disconnected.

Power to the system is on.

The system is in the standby mode.

Power to the Media Receiver is off. Or the power cord has been discon-

nected from the Media Receiver.

Power to the Plasma Display is off. Or the power cord has been discon-

nected from the Plasma Display.

For other than the above, see “Troubleshooting” on page 45.

Flashing

AAA

STEREO

10:00

STANDARD

FULL

Channel display