Owner's Manual
81
En
Useful Remote Control Features
13
English
Cable control buttons
When the Mode switch is set to CBL/SAT, the cable converter
connected to the display can be operated using 1 to 5.
Cable converters made by other manufacturers and not preset
can also be operated using the remote control unit if 1 to 5
have learned the functions. See page 78.
1 0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch.
2CH +/–
Selects a higher or lower channel.
3SOURCE
Turns the cable converter power on and off.
4CH ENTER *
Enters the selected channel with the direct channel
selection buttons.
5 CH RETURN *
Switches between the current channel and the channel
you were watching immediately before.
* Some manufacturers do not preset CH ENTER and CH
RETURN. Set up these buttons with the learning function if
necessary.
NOTE
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
2
4
5
1
3
Mode switch
(with “CBL/SAT”
selected)
PDP5060HD.book Page 81 Friday, July 15, 2005 11:30 AM