Owner's manual

ManualsBrandsPioneer ManualsHome Theater SystemsPDP-505HDE

07 Watching TV

Using g on the remote control unit

• In each of the sound multiplex mode selected using the g button, the display changes depending on broadcasting signals

being received.

• Once the MONO mode is selected, the Plasma Display System sound remains mono even if the system receives a stereo

broadcast. You must switch the mode back to p or pp mode if you want to hear stereo sound again.

• Selecting a sound multiplex mode while the input source is INPUT 1 to 4 or PC does not change the type of sound. In this

case, sound is determined by the video source.

Each time you press

g, MTS toggles as shown below.

p mode pp mode MONO mode

pppMONO

AAA

NICAM STEREO