Owner's manual

09Basic Adjustment Settings
English
33
En
Colour Temp
Adjusts the colour temperature, resulting in a better white
balance.
Selections High White with bluish tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low White with reddish tone
Manual
Colour temperature adjusted to your
preference
MPEG NR
Eliminates mosquito noise from video images when a digital
TV channel is watched or a DVD is played, resulting in noise-
free images.
Selections Off Deactivates the MPEG NR.
High Enhanced MPEG NR
Mid Standard MPEG NR
Low Moderate MPEG NR
DNR
Eliminates video noise for clean crisp images. The DNR
stands for Digital Noise Reduction.
Selections Off Deactivates the DNR.
High Enhanced DNR
Mid Standard DNR
Low Moderate DNR
You can manually adjust the colour temperature, using the
following procedure:
1 Select “Manual” while adjusting “Colour Temp” in step 5
above, and then press and hold ENTER for more than
three seconds to display the manual adjustment screen.
2 Press
/ to select an item to be adjusted, and then
press ENTER.
3 Press
/ to select the desired level, and then press
ENTER.
Item button button
R High For weaker red For stronger red
G High For weaker green For stronger green
B High For weaker blue For stronger blue
R Low For weaker red For stronger red
G Low For weaker green For stronger green
B Low For weaker blue For stronger blue
• To perform adjustment for another item, press
RETURN, and then repeat steps 2 and 3.
• You may press
/ to immediately change an item to
be adjusted.
4 Press HOME MENU to exit the menu.
Fine
adjustment
for bright
portions
Fine
adjustment
for dark
portions
Colour Management
Perform fine hue adjustment for each basic colour.
1
Press HOME MENU.
2
Select “Picture” ( / then ENTER).
3
Select “Pro Adjust” ( / then ENTER).
4
Select “Colour Management” ( / then ENTER).
5
Select an item to be adjusted ( / then ENTER).
Colour Management
0
0
0
0
0
0
Y
R
G
C
B
M
6
Select the desired level ( / ).
Item button button
R Closer to magenta Closer to yellow
Y Closer to red Closer to green
G Closer to yellow Closer to cyan
C Closer to green Closer to blue
B Closer to cyan Closer to magenta
M Closer to blue Closer to red
• To perform adjustment for another item, press
RETURN, and then repeat steps 5 and 6.
• You may press
/ to immediately change an item to
be adjusted.
7
Press HOME MENU to exit the menu.
CTI
Provides images with clearer colour contours. The CTI stands
for Colour Transient Improvement.
Selections Off Deactivates the CTI.
On Activates the CTI.
DRE
Adjusts dark and bright portions on images so that the
contrast between brightness and darkness becomes clearer.
The DRE stands for Dynamic Range Expander.
Selections Off Deactivates the DRE.
High Enhanced DRE
Mid Standard DRE
Low Moderate DRE
PDP-505XDE-Eng (33-35) 04.6.15, 1:08 PM33