Projection Television User Manual

INTRODUCTION

If you decide remove the protective screen.

1. Remove the left, right, upper, and lower frame covers.

2. Remove the screws from the upper panel frame and side

panel frames. (Not remove the screw from the lower panel.)

The protective screen is attached when the monitor is shipped to protect the display. We do not recommend that you remove it, but

if you have to remove it, do so following the procedure shown below.

3. While holding the screen in place, remove the upper panel

frame and side panel frames.

CAUTION:The panel frames are made of aluminum, so to

protect them from scratches, be extremely careful not to

strike them with the rim of the screen frame.

5. Remove the screws from the lower panel frame.

4. Remove the protective screen from the lower panel frame.

6. Reattach upper, lower and side panel frames as indicated

then follow on HOW TO ATTACH THE FRAME COVER.

Screw

Side panel

frame (L)

Side panel

frame (L)

Protective

screen

Lower

panel frame

Side view

Screw

When the protective screen is

attached.

When the protective screen is not

attached.

(Attach the panel frames reversed

as shown in the figure.)

Panel frame

Protective screen

Upper panel frame

HOW TO REMOVE THE PROTECTIVE

SCREEN

ARB1557A_En_007_011.P65 8/8/03, 16:3411