Projection Television User Manual

20
FRONT PANEL FUNCTIONS
A flip-down door conceals the INPUT 4 jacks. Push gently and
release, to open the door. To close the door, lift it back up into
place.
NOTE:
If you accidentally pull the door, it may not shut properly. Push
the door back in to shut it.
2 MAIN POWER (OFF/ON) button
If the button is OFF, the power of the monitor is shut off and 3
STANDBY/ON button on the monitor or TV power on the
remote control will not function. Pressing the button again
will turn the monitor ON and the monitor enters the standby
mode. In the standby mode, you can turn on the monitor using
the 3 STANDBY/ON button on the monitor or TV power on
the remote control.
3 POWER ( STANDBY/ON) button
Switches the monitor between on and standby (note that the
monitor consumes a small amount of power (0.5 W) in standby
mode.
4 INPUT SELECT and SET button
Press to select your program source. Each press of the INPUT
SELECT button changes the selection to the next source.
While the menu is displayed, it performs the same operation
as the SET/ENTER button on the remote control.
5 CHANNEL +, – and |, \ buttons
Press plus (+) or minus (–) to tune to a higher or lower channel.
Only the preset channels can be tuned in using these buttons.
Press to select or adjust items on the menu screen.
6 MENU button
Press to turn the menu on.
Press again to return to normal TV screen.
7 VOLUME +, – and », « buttons
Press plus (+) button to increase the volume, press minus (–)
button to decrease it.
Press to select or adjust items on the menu screen.
MENU
SET
MENU
ACCESS
STANDBY/ON
POWER CHANNEL
MAIN POWER
STANDBY
SELECT
ON
MENU
INPUT
2 3 4561
PUSH
1 POWER STANDBY/ON indicators
red: STANDBY
green: when lit; ON
when flashing; power management in operation
INPUT6 TV INPUT 1
INPUT 5 INPUT 4 INPUT 3 INPUT 2
Interior of the
door
ARB1557A_En_020_025.P65 8/8/03, 18:1120