Projection Television User Manual

Set the mode switch to TV.

TV Power button (STANDBY/ON)

Turns the power of the monitor on and off.

2 INPUT Selector buttons (TV, INPUT 1 to INPUT 6)

Press the button to select the source you wish to watch.

The screen will display your selection.

3 ANT (antenna selector) button

Press to switch between ANTENNA-A and ANTENNA-B

when you wish to watch TV.

4 Direct channel selection buttons

Press the button (or buttons) that corresponds to the

channel that you wish to watch.

5 CH RETURN (channel return) button

Press to switch between the current channel and the

channel you were watching immediately before.

6 CH (channel) +, – button

Press plus (+) or minus (–) to tune in a higher or lower

channel. Only the preset channels can be tuned in using

these buttons.

7 MUTING button

Press to temporarily turn off the sound. Press again to return

to the previous volume level.

8 RETURN button

Returns to the previous menu screen.

9 Select/Adjust/Set buttons (SET/ENTER, |, \, », «)

|, \, », «: Press to select or adjust items on the menu

screen.

SET/ENTER: Press to activate the selected function.

0 FAVORITE CH buttons

These buttons call up the channels that have been assigned

to them.

REMOTE CONTROL UNIT FUNCTIONS

Mode switch

ARB1557A_En_020_025.P65 8/8/03, 18:1122