Projection Television User Manual

30
1
Press MENU and select SET UP by using
the | or \ button and then pressing «
button. (Refer to page 26.)
2
Select CONVERGENCE in the same way.
MENU
END
SET
SET
SELECT
SET UP
c
c
CONVERGENCE
PROGRAM BLOCK
CHANGE P AS SWORD
SYSTEM IN/OUT
DIG ITAL I NTERFACE
CHANNEL SET UP
3
Select scan mode.
MENU
END
SET
SET
SELECT
CONVERGENCE
c
c
EXI T
ADJ USTMENT F OR 1 0 8 0 i
ADJ USTMENT F OR 4 80 p
• This accesses the center convergence adjustment.
When the cross pattern is white If the cross pattern shows other
colors or when one side of the
white line is red or blue
The color is converged. Press SET/
ENTER button twice, proceed onto
page 73 and perform MULTI-
POINT convergence.
This indicates that the color is
misconverged. Proceed to step 4
and perform the adjustment.
MENU
END
SET
SET
ADJUST
ADJ CONVERGENCE
MENU
END
SET
SET
ADJUST
ADJ CONVERGENCE
CONVERGENCE ADJUSTMENT
*1 Convergence adjustment ..... Color deviation adjustment
*2 Stabilized input signal .......... Examples, DVD player, digital tuner, etc.
Due to the differing magnetic fields in different locations, you may
experience color deviation, that is inaccurate colors. This is called
misconvergence. If your colors seem inaccurate, realign the color
convergence with the method below. Before doing this make sure you
warm up the TV for at least 30 minutes. A color convergence for each of 2
scan mode is necessary 480p and 1080i.
Before convergence adjustment*
1
, please choose a stabilized input signal*
2
in
order to display a stable cross pattern.
ARB1557A_En_028_031.P65 8/8/03, 16:4830