Projection Television User Manual

60
PICTURE ADJUSTMENTS
MENU
END
SET
SET
GAMMA:
TYPE3
CONTRAST EXP : OFF
SHARP MODE: MODE1
SELECT
PICTURE
c
c
BLACK ENHANCE:ON
SHARP EFFECT: ON
LTI : MID
9 To adjust Luminance Transient
Improvement (LTI)
This enables you to switch the definition of the luminance signal.
NOTES:
• It cannot be used during RGB signal input.
• It can be used only during PICTURE MODE PRO.
Select LTI .
MENU
END
SET
SET
SELECT
LTI : OFF MID HIGH
HIGH ........ Maximum LTI effects.
MID ..........Standard LTI effects.
OFF .......... No LTI effects.
MENU
END
SET
SET
LTI : MID
CONTRAST EXP : OFF
SHARP MODE OFF
SELECT
PICTURE
c
c
BLACK ENHANCE:ON
SHARP EFFECT: ON
GAMMA: TYPE3
0 To adjust GAMMA
This enables you to switch the balance of the contrast between the
bright parts and dark parts of the luminance signal.
NOTE:
It can be used only during PICTURE MODE PRO.
Select GAMMA .
MENU
END
SET
SET
SELECT
GAMMA: TYPE1 TYPE2 TYPE3
TYPE1 ...... Dark parts of luminance signals are more vividly
represented. It is used during movies and television
broadcasts with many dark scenes.
TYPE2 ...... Luminance signal is not corrected.
TYPE3 ...... It improves the contrast by widening the gap between
the bright parts and dark parts of the luminance signal.
ARB1557A_En_052_063.P65 8/8/03, 16:5260