Projection Television User Manual

84
REMOTE CODE SET UP
TO LEARN REMOTE CONTROL CODES
To operate other manufacturers' remote control codes not preset using
the remote control unit, have the remote control unit learn these signals.
Example) To learn the VCR power to turn on.
Before operation:
To set the mode switch to VCR when a video cassette recorder is connected
(see page 16).
1
At the same time, press the LEARN
button and number button 2.
LED will begin blinking.
2
Press the SOURCE POWER button to
memorize the desired operation.
LED will remain lit.
ARB1557A_En_081_091.P65 8/10/03, 09:3084