Projection Television User Manual

REMOTE CODE SET UP

REMOTE CONTROL UNIT SETTING BUTTONS

1 EDIT/LEARN button

EDIT: When the EDIT/LEARN button is pressed at the

same time as number button 1, the mode will

change to preset code edit mode. (See page

81.)

LEARN: When the EDIT/LEARN button is pressed at the

same time as number button 2, the unit’s

capability to learn and store command codes

from other remote control units will be activated.

(See page 84.)

2 Mode switch

Use to switch the remote control unit modes.

3 Light button

When this button is pressed, all the buttons on the remote

control unit will light. The lighting will turn off if no

operations are performed within five seconds.

This button is used for performing operations in dark places.

Transmitting LED

USING THE TV REMOTE

CONTROL UNIT TO CONTROL

OTHER DEVICES

ARB1557A_En_081_091.P65 8/10/03, 09:3086