Operation Manual

40
03
Connecting your equipment
Connecting a USB device
It is possible to play audio and photo files by connecting USB devices to this receiver.
HDMI 5 INPUT/
MHL (
5V 0.9 A
)
AUTO/ALC/
DIRECT HOME THXBAND TUNER EDIT
iPod iPhone iPad
DIRECT CONTROL
with USB
5V 2.1 A
USB mass
storage device
% Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see Playing a USB device on page 51.
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
MHL enabled
device
MHL cable
with USB
AUTO/ALC/
DIRECT HOME THXBAND TUNER EDIT
iPod iPhone iPad
DIRECT CONTROL
5V 2.1 A
HDMI 5 INPUT/
MHL (
5V 0.9 A
)
% Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the front panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see MHL Setup on
page 104.
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit’s power is turned on.)
! For instructions on playing the MHL-compatible device, see Playing an MHL-compatible device on page 52.
Connecting an HDMI-equipped component to the front panel
input
Video camera (etc.)
with USB
AUTO/ALC/
DIRECT HOME THXBAND TUNER EDIT
iPod iPhone iPad
DIRECT CONTROL
5V 2.1 A
HDMI 5 INPUT/
MHL (
5V 0.9 A
)
Connecting to a wireless LAN
The wireless LAN converter can be connected to connect this unit to a network wirelessly. Use the included
AS-WL300 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AS-WL300). For instructions on making these
settings, see the operating instructions included with the wireless LAN converter (AS-WL300).
LAN
(
10/100
)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
)
WAN
DC 5V WPS Ethernet
LAN
(
10/100
)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
)
InternetModem
Wireless LAN converter (AS-WL300)
Router