Instruction Manual

Wire Connection Diagram
① Main connectors cable - 2.6 ft (80 cm)
② GPS antenna - 10.5 ft (320 cm)
③ Red L sensor - 2.6 ft (80 cm)
④ Yellow R sensor - 2.6 ft (80 cm)
⑤ Red LED extension cable - 22.9 ft (700 cm)
⑥ Yellow LED extension cable - 22.9 ft (700 cm)
⑦ Red Left LED indicator cable - 1.6 ft (50 cm)
⑧ Yellow Right LED indicator cable - 1.6 ft (50 cm)
⑨ Speaker cable - 10.5 ft (320 cm)
⑩ Green reverse trigger wire - 5.9 ft (180 cm)
⑪ Pink left-turn signal trigger wire - 5.9 ft (180 cm)
⑫ Orange right-turn signal trigger wire - 5.9 ft
(180 cm)
⑬ Black GND - 5.9 ft (180 cm)
⑭ Red ACC/IGN - 15.7 ft (480 cm)
⑮ Red sensor extension cable - 22.9 ft (700 cm)
⑯ Yellow sensor extension cable - 22.9 ft (700 cm)
If cannot be connected to rear tail lamp (turn
signal lights maybe combined with brake lights)
then connect at the front fuse box.
Speaker
License Plate Bar with two sensors built inside
(Default: installed on the bottom of license plate)
1. Wiring connection for License
Plate Bar installed at the bottom
of the vehicle's license plate.
(Factory default)
2. Wiring connection for License Plate Bar
installed at the top of the vehicle's license plate.
(Option 2: installed on the top of license plate)
R sensor
L sensor
FUSE (2 A)
GPS Antenna
Left LED
indicator
Right LED
indicator
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
-10-
English