Quick Start Guide

24
EN
Specications/ Support
Troubleshooting
You do not know how to initialize. ■
Cause Solution
- Tap [System]-[Setting Manager]-[Initialize] from the home
screen to initialize. Refer to the User’s Guide for details. If
you initialize, the ride log data will be deleted. Save the data
to a PC before initialization.
Sensor information is not displayed. ■
Cause Solution
The sensor is not paired. Check that the sensor is paired to the device properly. If you
use the pedaling monitor sensor SGY-PM900, refer to the
User’s Manual of the SGY-PM900 and Installation Manual.
The sensor battery is almost empty. Replace the battery with a new one. Refer to the user’s
manual of the sensor about how to replace the battery.
The latitude and longitude are not displayed. ■
Cause Solution
Reception is poor when inside a
room or in areas surrounded by
mountains.
It may take a few minutes to display
the latitude and longitude when you
use the device the rst time.
Use the device outside in an open area.
When you use the device for the rst time, you may need to
allow extra time.