SN29403247_SX-10AE_En_1707XX.
SN29403247_SX-10AE_En_1707XX.book > Before Start 2 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Table of Contents Before Start Before Start............................................................. 2 What's in the box ..................................................... 3 Part Names ............................................................. 4 Part Names ............................................................. 4 Install.....................................
SN29403247_SX-10AE_En_1707XX.book > Before Start 3 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others What's in the box 1. Main unit (1) 2. Remote controller (RC-963R) (1), batteries (AAA/R03) (2) 3. FM indoor antenna (1) 4. AM indoor antenna (1) ≥ Instruction Manual (This document) (1) 1 2 3 0 Connect speakers with 4 ≠ to 16 ≠ impedance. Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B.
SN29403247_SX-10AE_En_1707XX.book > Before Start 4 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Part Names Part Names Front Panel 1. Í STANDBY/ON button 2. SPEAKERS A/B button: Select the terminals to output audio from between SPEAKERS A/B. 3. DIRECT button: Switches to the DIRECT mode which outputs pure sound as it was intended. 4. Display (P5) 5. Remote control sensor: Receives signals from the remote controller.
SN29403247_SX-10AE_En_1707XX.book > Before Start 5 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Display 1. The currently selected speaker system lights. 2. Lights when headphones are connected. 3. Lights in the following conditions. PRESET: PRESET mode has been selected with TUNING/PRESET on the main unit. RDS (European and Australian models): Receiving RDS broadcasting. AUTO: When tuning mode is auto. 1TUNED2: Receiving AM/FM radio.
SN29403247_SX-10AE_En_1707XX.book > Before Start 6 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Rear Panel 1. FM UMBAL 75Ω/AM LOOP ANTENNA terminals: Connect the supplied FM indoor antenna and AM indoor antenna. 2. PRE OUT SUBWOOFER jack: Connect a powered subwoofer with a subwoofer cable. 3. SPEAKERS jacks: Connect speakers with speaker cables. You can connect a set of left and right speakers to each of the A/B terminals. 4. Power cord 5.
SN29403247_SX-10AE_En_1707XX.book > Before Start 7 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Remote Controller 1. Í STANDBY/ON button 2. SLEEP button: Set the sleep timer (P20). 3. INPUT SELECTOR buttons: Switches the input to be played. 4. Numbered buttons 5. DIRECT TUNING button: Use to select the number of a preset station or to directly input the frequency of the station. 6.
SN29403247_SX-10AE_En_1707XX.book > Before Start 8 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Step1: Connect the Speakers Install You can connect two systems, Speaker A and Speaker B, as the Speaker System. When connecting only one set, connect to the SPEAKERS A terminals. With one set, use speakers with 4 ≠ to 16 ≠ impedance. Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B.
SN29403247_SX-10AE_En_1707XX.book > Before Start 9 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Step2: Connect an other External Device AUDIO IN connection Connect an other external device with an analog audio cable.
SN29403247_SX-10AE_En_1707XX.book > Before Start 10 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Step3: Connect Other Cables Antenna Hookup FM (North American models) Move the antenna around while playing the radio to find the position with the best reception. (European and Australian models) Power Cord Hookup The power cord must be connected only after all other connections are completed.
SN29403247_SX-10AE_En_1707XX.book > Before Start 11 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Playing Audio from a Connected Device Playback 1 2 3 4 Basic Operations You can play the audio from other external devices such as CD players through this unit. Perform the following procedure when the unit is on. 1. Press the input selector button (a) on the remote controller with the same name as the jack to which you connected the player to switch the input.
SN29403247_SX-10AE_En_1707XX.book > Before Start 12 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others BLUETOOTH® Playback 1 2 3 Pioneer SX-10AE You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device. Perform the following procedure when the unit is on. Pairing 1. When you press (a), "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. Now Pairing . . . 2.
SN29403247_SX-10AE_En_1707XX.book > Before Start 13 ページ ２０１７年７月１９日 > Part Names 水曜日 午後１時５９分 > Install > Playback Setup | Others Listening to the AM/FM Radio 1 continuously if the button is held down and stops when the button is released. 2 Tuning into Stations by Frequency You can receive AM/FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on.
SN29403247_SX-10AE_En_1707XX.book > Before Start 14 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others ∫ Using RDS (European and Australian models) RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information. Further, when you press DISPLAY on the remote controller in this state, you can use the following functions.
SN29403247_SX-10AE_En_1707XX.book > Before Start 15 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Registering a Station 1 2 You can register up to 40 of your favorite radio stations. Registering After tuning into the radio station you want to register, perform the following procedure. 1. Press MEMORY on the main unit so that the preset number on the display flashes. STATION 1 1 2.
SN29403247_SX-10AE_En_1707XX.book > Before Start 16 ページ ２０１７年７月１９日 > Part Names 水曜日 午後１時５９分 > Install > Playback Setup | Others Naming Radio Stations Registered as Presets You can enter names of up to 8 characters for the stations you have preset. Uses the following procedure. a b c 1. After pressing AM or FM on the remote controller, select a preset number. 2.
SN29403247_SX-10AE_En_1707XX.book > Before Start 17 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Adjusting the Sound Quality By pressing BASS, TREBLE, etc. on the remote controller during play, you can adjust frequently used settings, such as the sound quality. 0 BALANCE adjustments can only be made with the buttons on the main unit. ∫ BASS (a) increments. (default value: 0) Enhance or moderate the bass range of the speakers.
SN29403247_SX-10AE_En_1707XX.book > Before Start 18 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Setup Menu Setup 1 The unit allows you to configure advanced settings to provide you with an even better experience. 1. Press SETUP (b) on the remote controller. AutoStandby 2. Select the item with the Up/Down buttons (a) on the remote controller and press ENTER (d) to confirm your selection. 3. Select the submenu with the Up/Down buttons (a) on the remote controller.
SN29403247_SX-10AE_En_1707XX.book > Before Start 19 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others "4 ohm": When any of the connected speakers have 4 ≠ or more to less than 6 ≠ impedance, or when speaker systems are connected to both of the SPEAKERS A/B terminals "6 ohm (default value)": When the connected speakers all have 6 ≠ or more impedance 0 Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B.
SN29403247_SX-10AE_En_1707XX.book > Before Start 20 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others Device Displays the name of the BLUETOOTH wireless technology enabled device connected to the unit. 0 The name is not displayed when "Stat" is "Ready" or "Pairing". Stat Displays the status of the BLUETOOTH wireless technology enabled device connected to the unit.
SN29403247_SX-10AE_En_1707XX.book > Before Start 21 ページ ２０１７年７月１９日 > Part Names 水曜日 午後１時５９分 > Install > Playback Setup | Others Troubleshooting Others Before starting the procedure ∫ Power Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
SN29403247_SX-10AE_En_1707XX.book > Before Start 22 ページ ２０１７年７月１９日 > Part Names 水曜日 午後１時５９分 > Install > Playback Setup | Others technology enabled device may be effective. 0 The BLUETOOTH wireless technology enabled devices must support the A2DP profile. 0 Radio wave interference may occur in the vicinity of components, such as microwave ovens or cordless phones, which use radio waves in the 2.4 GHz range. This interference may render this unit unusable.
SN29403247_SX-10AE_En_1707XX.book > Before Start 23 ページ ２０１７年７月１９日 > Part Names 水曜日 > Install 午後１時５９分 > Playback Setup | Others General Specifications Amplifier (Audio) section Rated Output Power (FTC) (North American) 0 With 8 ohm loads, both channels driven, from 20 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
SN29403247_SX-10AE_En_1707XX.book 24 ページ ２０１７年７月１９日 The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. / Toutes les autres marques commerciales sont la propriété de leurs détenteurs respectifs. / El resto de marcas comerciales son propiedad de sus respectivos propietarios. / Tutti gli altri marchi di fabbrica sono di proprietà dei rispettivi proprietari.
SN29403247_SX-10AE_En_1707XX.
SN29403247_SX-10AE_En_1707XX.
SN29403247_SX-10AE_En_1707XX.
SN29403247_SX-10AE_En_1707XX.book 1 ページ ２０１７年７月１９日 水曜日 午後１時５９分 2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
