Manual
TO LISTEN TO OTHER MUSIC SOURCES
4
1. Press the POWER switch to the ON position. Also
turn on the power to the stereo components you
wish to use.
2, Use the function buttons and tape monitor but-
ton as appropriate to select the desired program
source.
Select function according to the table on the right.
3. Operate the appropriate stereo component to
play back the program source.
4. Adjust the volume with the VOLUME control and
the tone with TREBLE tone control, BASS tone
control and S.BASS button.
To listen to TAPE1/VCR
Function
buttons
TAPE 1
/VCR
TAPE 2
MONITOR
button
OFF
To listen to a tape on the cas-
sette deck connected to TAPE 2 -- ON
MONITOR jacks.
To listen to records PHONO OFF
To listen to the component con- LD OFF
nected to LD jack
To listen to a CD CD OFF
TAPE RECORDING
1 2
: L ¸ooool
0 0 O0 O0 oooooo
ioooc ==ooolH
You can record an FM or AM broadcast, or a sound source con-
nected to the LD, CD, PHONO terminals.
1. Press the POWER switch to the ON position.
2. Select the sound source to be recorded.
3. Operate the cassette deck connected to the
TAPE 1/VCR or TAPE 2 MONITOR terminals.
4. Turn on (or start) the sound source to be record-
ed.
• For details of operating the cassette deck, read the operating
instructions of the cassette deck.
COPYING TAPES
When two cassette decks are used, the sound played back on the
deck connected to the TAPE 1/VCR jacks can be recorded on the
deck connected to the TAPE 2 jacks.
To make a tape copy with contents identical to the original
tape.
To edit a recording of an FM broadcast in order to cut out un-
wanted commercials, recording only the desired material onto
another tape.
iF
TAPE 1/VCR
_ _I PLAYBACK Ir"_-I .
_ [0 o o
000000
[ J
o o o o o o RECORDIN
[When using two cassette decks]
1. Load the playback tape (i,e. the pre-recorded
tape) in the deck connected to the TAPE 1/VCR
jacks, and the tape to be recorded in the other
deck connected to the TAPE 2 jacks.
2. Press the TAPE 1/VCR button.
3. Operate the cassette decks to begin copying.
Set the cassette deck with the non-recorded tape to the record-
ing mode, and set the cassette deck with the original tape to the
playback mode.
12
<ARB1470>