Instruction Manual

7
Connections
Front panel
Balanced headphone output connector (XLR3) (PHONES 2)
Connect an XLR 3-pin headphone connector here. Supported
headphones impedance 16
Ω
to 600
Ω
.
Terminal leads for the 3-pin balanced output are as follows:
1
GND
2
HOT
3
COLD
Headphone jack (unbalanced) (PHONES 3)
Use this jack to connect a standard headphones plug.
Supported headphones impedance 16
Ω
to 600
Ω
.
Balanced headphone output connector (XLR4) (PHONES 1)
Connect an XLR 4-pin headphone connector here. Supported
headphones impedance 16
Ω
to 600
Ω
.
Terminal leads for the 4-pin balanced output are as follows:
1
Lch HOT
2
Lch COLD
3
Rch HOT
4
Rch COLD
Caution
• Take care when connecting input/output and
headphones connectors to be sure the pins are aligned
properly.
Balanced output connector
(appearance on unit side)
1
3
4
2
Balanced output connector
(appearance on unit side)
2
1
3
Rotate the
OUTPUT
knob to the desired
headphone position before beginning
playback.