Owner's manual

3
3 Use a proper USB cable to connect a computer to a device equipped with
USB connector, then turn on the power.
For more information regarding connections, check the Operating Instructions for this
device.
USB
* The illustration may appear differently, depending on the model used.
4 Switch the unit to the input source corresponding to the USB port.
5 In the decompressed folder, double click on “Setup.exe” to execute it.
The InstallShield wizard will appear.
• If an older version of this driver program is found on the computer, the InstallShield wizard
will display a “delete” option. In this event, follow the on-screen instructions to delete the older
version, then reboot your computer and once again install the new driver program.
• The menu illustrations shown in these Operating Instructions may differ from those actually
displayed.
6 Click on [Next].
7 Click on [Install].
The following screen will appear; wait until the step 8 instructions appear.
If the message “Windows protected your PC” appears, click on “More info” and then press
“Run anyway”.
Procedure continues.
A–type
B–type