Manual

_*r_5_ Lh(: lJuvv_;k _,qVIIL;II tO ltlC L.)N posIUorl, _rld turn on the puwer to
the other components you wish to use (for example, TV, VCR,
cassette deck, etc.).
MASTER VOLUME
,d1
L_J l
Input selector
PLAYBACK
I
1. Use the input selector buttons to select the desired program
source.
* Ifyou select a music source other than TAPE 2, switch OFF the TAPE
2 MONITOR:
Program Source
To listen to records
To listen to compact discs
To listen to a tape on the cassette deck
connected to TAPE 2 MONITOR jacks
To play back on a VCR connected to
the VCR/TAPE 1 jack, or to play back
on a cassette deck.
To watch a LaserDisc
Input selector
PHONO
CD
TAPE 2 MONITOR
VCR/TAPE 1
LD
-2. Operate the appropriate audio/video component to play
back the program source.
• For a video source, switch the "IV connected to this unit to the
video input mode.
3. Adjust the volume and tone controls as desired.
=When listening to a monaural source, turn the SIMULATED
STEREO button ON to enjoy simulated stereo sound.
• Refer to pages 17 and 18 for details concerning surround
operation.
RECORDING WITH A CASSETTE DECK
RECORDING WITH VCR/TAPE 1 }
If the TAPE 2 MONITOR button is ON, press to turn OFF.
1. Select the source you went to record from with the input
selector buttons.
• When recording to AM or FM broadcasts, press the desired
STATION CALL button if the station has been preset. If the
desired station has not been preset, tune in the station using
Auto, Manual, or Direct Access tuning.
2. Start recording on VCR/TAPE 1 cassette deck or VCR.
3. Play the desired program source (record, compact disc, etc.).
• The volume, balance and tone controls have no effect on the
recording.
RECORDING WITH TAPE 2 ]
1. Select the source you want to record from with the input
selector buttons.
• Be sure the TAPE 2 MONITOR button is OFF.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
When copying a tape, play back on the VCR/TAPE 1 cassette deck,
and record on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped with
monitoring function, the recorded sound can be monitored through
the speaker system by pressing the TAPE 2 MONITOR button to ON.
USe wIt[I VldeU ut dUUl(J +uitwalu bealmg the L]LJ[DOLBYSUI_ROLINDJ
mark.
Use DOLBY PRO LOGIC SURROUND when rear speakers are
connected, and DOLBY 3CH LOGIC when rear speakers aren't
connected.
For correct surround reproduction, be sure to perform following
adjustments.
51-'EAKLH5 DULBY 3CH LOGIC UULbY H/U LOGIC
ol tii;ii'i ooI
L.--J _
17
<ARB1466>