Manual

REMOTE CONTROL OPERATION
I RECEIVER TUNER AND AMPLIFIER SECTION OPERATION
@
®
®
®
®
®
®
@
@
[TUNER SECTION OPERATION]
I Set the AUDIO/VIDEO switch to AUDIO.
(D MPX button
Switches between MONO/AUTO STEREO during FM reception.
_) SCAN button
Use this to start memory scan of stations.
® STATION "-" (Down) "+" (Up) buttons
Used for recalling memorized stations.
[AMPLIFIER SECTION OPERATION]
® FUNCTION button
Press to select the receiver input,
i _ LD _ CD _ VCR
TUNER _ PHONO =
(_) TAPE 2 MONITOR button
Switches TAPE 2 MONITOR ON/OFF.
® SIMULATED STEREO button
Switches simulated stereo mode ON/OFF.
3CH LOGIC button
Switches DOLBY 3CH LOGIC ON/OFF.
® SURR. (Surround) MODE button
The surround mode is switched in the following manner each time
the button is pressed:
DOLBY PRO LOGIC SURROUND
I-- OFF _- STUDIO _- SIMULATED SURROUND
_) CENTER MODE/TEST TONE button
• AUDIO/VIDEO switch ... AUDIO position
Functions as a CENTER MODE button, enabling selection of the
DOLBY PRO LOGIC SURROUND and DOLBY 3CH LOGIC center
mode.
• AUDIO/VIDEO switch ... VIDEO position
Functions as a TEST TONE button for switching the test tone ON/
OFF.
@ RECEIVER POWER button
Switches the receiver power ON/STANDBY.
@ RETURN button
Press to return the receiver to it's initial state. (Refer to page 13.)
@ MUTING button
Press to temporarily reduce sound. When set to the on position, MUTING is
displayed. Press again to return to the original volume level.
@ MASTER VOLUME (+, --) buttons
Use to adjust the overall volume level.
CENTER/REAR (+, --) buttons
• AUDIO/VIDEO switch ... AUDIO position
Function as CENTER LEVEL adjustment buttons.
• AUDIO/VIDEO switch ... VIDEO position
Function as REAR LEVEL adjustment buttons.
2O
<ARB1466>
@ SLEEP/DELAY TIME button
• AUDIO/VIDEO switch ... AUDIO position
Functions as a SLEEP button.
Activates the SLEEP timer. The length changes in the following
manner each time the button is pressed:
90 --_60 ---_30 ---_ off --]
/ /
Unit: minutes
When SLEEP is ON, the display section is about half as bright as
when SLEEP is OFR
• AUDIO/VIDEO switch ... VIDEO position
Functions as a DELAY TIME button. You can change rear speaker
delay time during DOLBY PRO LOGIC SURROUND or SIMULATED
SURROUND operation.