Manual

23
03
Connecting your equipment
Connecting your TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it
to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used (see Control with HDMI function on page 58).
HDMI
IN
1
IN
(
TV
)
1
IN
(
DVD
)
1
-
1 7
(
DVD
)
IN
2
(
SAT/CBL
)
IN
3
IN
4
IN
6
IN
7
(
DVR/BDR
) (
CONTROL
)
ASSIGNABLE
BD IN
OUT 1
OUT 2
(HDZONE)
SELECTABLE
LAN
(
10/100
)
(
OUTPUT 5 V
0.6 A MAX
)
DC OUTPUT
for WIRELESS LAN
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
L
R
IN
1
ANALOG IN
(CD)
ASSIGNABLE
HDMI
IN
1
IN
(
TV
)
1
IN
(
DVD
)
1
-
1 7
(
DVD
)
IN
2
(
SAT/CBL
)
IN
3
IN
4
IN
6
IN
7
(
DVR/BDR
) (
CONTROL
)
ASSIGNABLE
BD IN
OUT 1
OUT 2
(HDZONE)
SELECTABLE
LAN
(
10/100
)
(
OUTPUT 5 V
0.6 A MAX
)
DC OUTPUT
for WIRELESS LAN
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
L
R
IN
1
ANALOG IN
(CD)
ASSIGNABLE
DIGITAL OUT
COAXIALOPTICAL
ANALOG
RL
AUDIO OUT
HDMI INHDMI OUT HDMI OUT
HDMI/DVI-compatible
Blu-ray Disc player
Other HDMI/DVI-
equipped component
HDMI/DVI-compatible
monitor
Select one
This connection is required in
order to listen to the sound of
the TV over the receiver.
! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI
output setting to OUT 2 or OUT 1+2. See Switching the HDMI output on page 68.
Also, MAIN/HDZONE must be set to MAIN beforehand (page 88).
! For input components, connections other than HDMI connections are also possible (see Connecting your DVD
player with no HDMI output on page 24).
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so
there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on
page 59).
After setting the ARC, some time may be required for the connected device to be recognized and the sound to
be produced.
— If you use a coaxial digital audio cable or RCA (analog) audio cable, you’ll need to tell the receiver which digi-
tal or analog audio input you connected the TV to (see The Input Setup menu on page 36).
— Please refer to the TV’s operation manual for directions on connections and setup for the TV.