Manualshelf

Instruction Manual

ManualsBrandsPioneer ManualsHome Theater SystemsVSX-LX55
11121314151617181920
En
17
02
Connecting your equipment
2 Connect a TV monitor to the VIDEO
ZONE 2 OUT jack on this receiver.
L
R
OUT 2
PRE O
UBWOOFER
2
TER
SURROUND SURR BACK
FH / FW
(
CD
)
D
)
AXIAL
SIGNABLE
1
IN
2
(
DVR/BDR
)(
TV/SAT
)
OPTICAL
ASSIGNABLE
IN
1
IN
2
IN
3
OUT
(
VIDEO
)
DC OUTPUT
for WIRELESS LAN
(
10/10
LAN
(
OUTPUT
5 V
0.6 A MAX
)
UND
SURROUND BACK
L
R
R L
(
Single
)
(
Single
)
FRONT HE
RS-232C
ZONE 2
OUT
ZONE 3
OUT
COMPONENT VIDEO
Y P
B
P
R
ASSIGNABLE
MONITOR
OUT
(
DVD
)
IN
1
(
DVR/
BDR
)
IN
2
HDMI
IN
1
IN
2
ASSIGNABLE
1 6
EXTENSION
FM UNBAL 75
AM LOOP
ANTENNA
(
OUTPUT 5 V
150 mA MAX
)
CONTROL
IR
OUT
IN
IN
1
IN
(OU
TO
VIDEO IN
RL
Sub zone (ZONE 2)
Main zone
Secondary MULTI-ZONE setup
(ZONE 3)
% Connect a separate amplifier to the
AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to
the sub zone amplifier as shown in the follow-
ing illustration.
HDMI
(VIDEO)
IN
1
IN
2
IN
4
ASSIGNABLE
1 6
R L
AUDIO IN
Sub zone (ZONE 3)
Main zone
Connecting to the network
through LAN interface
By connecting this receiver to the network via
the LAN terminal, you can listen to Internet
radio stations. To listen to Internet radio sta-
tions, you must sign a contract with an ISP
(Internet Service Provider) beforehand.
When connected in this way, you can play audio
files stored on the components on the network,
including your computer, using HOME MEDIA
GALLERY inputs.
L
R
PRE OUT
OFER
2
SURROUND SURR BACK
FH / FW
(
CD
)
B
LE
IN
2
(
DVR/BDR
)(
TV/SAT
)
OPTICAL
ASSIGNABLE
IN
1
IN
2
IN
3
OUT
(
VIDEO
)
DC OUTPUT
for WIRELESS LAN
(
10/100
)
LAN
(
OUTPUT
5 V
0.6 A MAX
)
SURROUND BACK
L
R
R
L
(
Single
)
(
Single
)
FRONT HEIGHT /
F
WAN
3 2 1
LAN
Internet
Modem
Router
LAN cable
(sold separately)
to LAN port
PC
Connect the LAN terminal on this receiver to
the LAN terminal on your router (with or with-
out the built-in DHCP server function) with a
straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your
router. In case your router does not have the
built-in DHCP server function, it is necessary
to set up the network manually. For details, see
Network Setup menu on Operating Instructions
in CD-ROM.
LAN terminal specifications
! LAN terminal : Ethernet jack
(10BASE-T/100BASE-TX)
Note
! Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may differ
depending on your Internet environment.
! When using a broadband Internet connection,
a contract with an Internet service provider
is required. For more details, contact your
nearest Internet service provider.
Connecting to a wireless LAN
Wireless connection to the network is possible
through a wireless LAN connection. Use the
AS-WL300 for connection.
! Use only the furnished accessory connecting
cable.
WAN
DC 5V WPS
Ethernet
L
R
2
PRE OUT
O
OFER
2
SURROUND SURR BACK
FH / FW
(
CD
)
BLE ASSIGNABLE
IN
2
(
DVR/BDR
)(
TV/SAT
)
OPTICAL
IN
1
IN
2
IN
3
OUT
(
VIDEO
)
(
OUTPUT 5
V
0.1 A MAX
)
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
(
10/100
)
LAN
(
OUTPUT
5 V
0.6 A MAX
)
SURROUND BACK
L
R L
R
L
(
Single
)
(
Single
)
FRONT HEIGHT / FRONT WIDE /
B
Internet
Modem
Wireless LAN converter (AS-WL300)
Router
Plugging in the receiver
Only plug in after you have connected all your
components to this receiver, including the
speakers.
CAUTION
! Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord, and
never touch the power cord when your hands
are wet, as this could cause a short circuit or
electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or
pinch the cord in any other way. Never make
a knot in the cord or tie it with other cables.
The power cords should be routed so that they
are not likely to be stepped on. A damaged
power cord can cause a fire or give you an
electric shock. Check the power cord once in a
while. If you find it damaged, ask your nearest
Pioneer authorized independent service
company for a replacement.
! Do not use any power cord other than the one
supplied with this unit.
! Do not use the supplied power cord for any
purpose other than that described below.
! The receiver should be disconnected by
removing the mains plug from the wall
socket when not in regular use, e.g., when on
vacation.
! If you have connected speakers with a 6 W
impedance, change the impedance setting
before turning on the power.
! VSX-LX55 only:
Make sure the blue u STANDBY/ON light has
gone out before unplugging.
1 Plug the supplied power cord into the
AC IN socket on the back of the receiver.