VSX-S510-K /-S /-W VSX-S310-K /-S AV Receiver Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu).
CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. D3-4-2-1-1_B1_En This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_A1_En WARNING This equipment is not waterproof.
Information for users on collection and disposal of old equipment and used batteries Symbol for equipment These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Connecting an HDMI-equipped component to the front panel input (VSX-S510 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Plugging in the receiver . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 03 Basic Setup Checking what’s in the box. . . . . . . . .
Contents X.Over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channel Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speaker Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Input Assign menu . . . . . . . . . . . . . . . . . . . . . . . . . . Analog Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Auto Power Down menu . . . . . . . . . . . . . . . . . . . . . . The Network Standby menu (VSX-S510 only) . .
Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: • Setup microphone • Remote control • AAA size IEC R03 dry cell batteries (to confirm system operation) x2 • AM loop antenna • FM wire antenna • Power cord • Warranty card • Quick start guide • SPEAKER CAUTION Sheet (English only) • These operating instructions (CD-ROM) Flow of settings on the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals.
Chapter 1 Controls and displays 4 Front panel 4 5 6 7 8 15 16 17 18 19 17 20 7 58 21 1 2 3 9 1 STANDBY/ON 2 PHONES jack Use to connect headphones. When the headphones are connected, there is no sound output from the speakers. The listening mode when the sound is heard from the headphone can be selected only from PHONES SURR, STEREO or STEREO ALC mode (S.R AIR mode can be also selected with ADAPTER input).
1 17 Tuner indicators RDS – Lights when an RDS broadcast is received (page 34). (for Europe) ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 33). TUNE – Lights when a normal broadcast channel. PRESET – Shows when a preset radio station is registered or called. MEM – Blinks when a radio station is registered. kHz/MHz – Lights when the character display is showing the currently received AM/FM broadcast frequency.
1 Controls and displays 1 SLEEP Remote control 1 11 2 12 3 13 4 14 Press to change the amount of time before the receiver switches into standby (30 min – 60 min – 90 min – Off). You can check the remaining sleep time at any time by pressing SLEEP once. 2 STANDBY/ON Switches the receiver between standby and on. 3 RECEIVER Switches the remote to control the receiver (used to select the white commands (SB CH, etc.)).
1 SB CH (VSX-S510 only) – Press to select ON, AUTO or OFF the surround back channel (page 38). CH SEL – Press repeatedly to select a channel, then use CH LEVEL +/– to adjust the level (page 52). CH LEVEL +/– – Use to adjust the channel level. BASS +/–, TRE +/– – Use to adjust Bass or Treble. • These controls are disabled when the listening mode is set to DIRECT or PURE DIRECT. • When the front speaker is set at SMALL in the Speaker Setting (or automatically via the Auto MCACC setup) and the X.
Chapter 2 Connecting your equipment Determining the speakers’ application This unit permits you to build various surround systems, in accordance with the number of speakers you have. • Be sure to connect speakers to the front left and right channels (L and R). • If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal. Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction.
2 Connecting your equipment Some tips for improving sound quality Where you put your speakers in the room has a big effect on the quality of the sound. The following guidelines should help you to get the best sound from your system. • It is best to angle the speakers towards the listening position. The angle depends on the size of the room. Use less of an angle for bigger rooms. • Refer to the chart below for placement of speakers you intend to connect.
2 Connecting your equipment 4 VSX-S510 connection diagram CAUTION • These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts. • Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.
2 Connecting your equipment VSX-S310 connection diagram Powered Subwoofer Switching the speaker terminal Front right Front left Center LINE LEVEL INPUT LINE LEVEL INPUT CENTER PREOUT SUBWOOFER FRONT R L Surround right Surround left SURROUND R L VSX-S510: When the The Speaker System setting (VSX-S510 only) on page 54 is set to SPB, each press of the SP-A/B button will switch the SPAB used for playback: SP, SPA, SPB, SPAB.
2 Connecting your equipment Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Important • Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet. • Before unplugging the power cord, switch the power into standby.
2 Connecting your equipment Analog audio cables Digital audio cables Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals. Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver. White (Left) About video outputs connection This receiver is not loaded with a video converter.
2 Connecting a TV and playback components Connecting your equipment DVD player Blu-ray Disc player HDMI OUT HDMI OUT HDMI/DVI-compatible components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable.
2 Connecting your equipment DVD player Blu-ray Disc player HDMI/DVI-compatible components 4 7 HDMI OUT HDMI OUT Set-top box 58 Game console VSX-S310 HDMI OUT HDMI IN OPTICAL IN1 (TV) MONITER OUT ANALOG IN1 (CD) VIDEO IN HDMI IN R HDMI/DVI-compatible TV This connection is necessary in order to see the OSD of the unit on the TV.
2 Connecting your equipment Connecting optional Bluetooth ADAPTER (VSXS510 only) Connecting to the network through LAN interface (VSX-S510 only) When the Bluetooth ADAPTER (Pioneer Model No. AS-BT100 or AS-BT200) is connected to this unit, a product equipped with Bluetooth wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music wirelessly. By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations.
2 Connecting your equipment Using external antennas Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). fig. b fig. a To improve FM reception For Europe, Russian and U.K. Use a PAL connector (not supplied) to connect an external FM antenna.
2 Connecting your equipment Connecting an iPod This receiver has a dedicated iPod/iPhone or iPad (VSX-S510 only) terminals that will allow you to control playback of audio content from your iPod using the controls of this receiver. VSX-S510 • iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the unit’s power is turned on.) • For instructions on playing the iPod, see Playing an iPod on page 28.
2 Connecting your equipment Connecting an HDMI-equipped component to the front panel input (VSX-S510 only) Plugging in the receiver Only plug in after you have connected all your components to this receiver, including the speakers. 1 Plug the supplied power cord into the AC IN socket on the back of the receiver. 2 Plug the other end into a power outlet. CAUTION Video camera (etc.) • Handle the power cord by the plug.
Chapter 3 Basic Setup Before setting up (VSX-S310 only) This receiver allows you to adjust the system setup, using the on-screen display (OSD) that is shown on the TV screen. • Use composite connections for system setup. • For connecting this receiver with the TV, please refer see page 17. First, follow the procedure below to make sure that the OSD screen is displayed. 1 Switch on the receiver and your TV.
3 Basic Setup • Press HOME MENU at any time to exit the Home Menu. If you cancel the Auto MCACC setup at any time, the receiver automatically exits and no settings will be made. • The screensaver automatically starts after three minutes of inactivity. for the test tones to finish. 8 Wait A progress report is displayed on-screen while the receiver outputs test tones to determine the speakers present in your setup. Try to be as quiet as possible while it’s doing this. 1 . Au to M C AC C 2 .
3 Basic Setup 4 Other problems when using the Auto MCACC setup If the room environment is not optimal for the Auto MCACC setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary. If there are any instructions showing in the front panel display, please follow them.
Chapter 4 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. on your system components and receiver. 1 Switch Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have one), then the receiver (press STANDBY/ON). • Make sure the setup microphone is disconnected. the TV input to the input that connects this 2 Switch receiver.
4 • When set to H (HDMI) or C1/O1 (digital), 2 lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input. • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal formats.
4 Basic playback Tip • In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following. Video/Audio (HDMI) DVD VSX-S310 SAT/CBL GAME TV CD (TV input) RECEIVER O1 TUNER Audio Audio CD TV TV RECEIVER CD A RECEIVER ANALOG IN1 audio input terminal is assigned to CD under factory settings. If you want to change this to TV input, please change the settings in the Input Assign menu (page 53).
4 Basic playback iPod/USB to switch the receiver to the iPod/USB 3 Press input. When the display shows the names of folders and files, you’re ready to play music from the iPod. • If after pressing iPod/USB the display shows NO DEVICE, try switching off the receiver and reconnecting the iPod to the receiver. • The controls of your iPod will be inoperable when connected to this receiver.
4 Basic playback • Select another input source (like BD), then switch back to iPod/USB. • Use a dedicated AC adapter (supplied with the device) for USB power. If this doesn’t remedy the problem, it is likely your USB device is incompatible. Playing back audio files stored on a USB memory device The maximum number of levels that you can select in Step 1 (below) is 9. Use / to select a folder, then press ENTER to browse 1 that folder. • To return to the previous level any time, press RETURN.
4 Basic playback AIFF (VSX-S510 only) .aif .aiff Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch Apple Lossless (VSX-S510 only) .m4a .mp4 Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch a. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. b.
4 Basic playback Bluetooth ADAPTER for Wireless Enjoyment of Music (VSX-S510 only) Bluetooth wireless technology enabled device: cell phone Bluetooth wireless technology enabled device: Digital music player Device not equipped with Bluetooth wireless technology: Digital music player + Bluetooth audio transmitter (sold commercially) Music data This receiver Bluetooth® ADAPTER Remote control operation Wireless music play When the Bluetooth ADAPTER (Pioneer Model No.
4 Basic playback Switch on the Bluetooth wireless technology device 5 that you want to make pairing, place it near the system and set it into the pairing mode. • Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in the remote control buttons. to see that the Bluetooth ADAPTER is detected by 6 Check the Bluetooth wireless technology device.
4 Basic playback Improving FM sound If the TUNE or ST indicators don’t light when tuning to an FM station because the signal is weak, set the receiver to the mono reception mode. BAND to select FM MONO. Press This should improve the sound quality and allow you to enjoy the broadcast. Saving station presets If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station.
4 Note • In addition, there are three other program types, ALARM, ALARMTST, and NO TYPE. ALARM and ALARMTST are used for emergency announcements. NO TYPE appears when a program type cannot be found. Basic playback Searching for RDS programs Displaying RDS information You can search for a program type listed above. Use the DISP button to display the different types of RDS information available. TUNER then press BAND to select the FM band. 1 Press • RDS is only possible in the FM band. PTY.
Chapter 5 Listening to your system Choosing the listening mode This receiver offers a variety of listening modes to accommodate playback of various audio formats. Choose one according to your speaker environment or the source. listening to a source, press the listening mode While button repeatedly to select a listening mode you want.
5 Listening to your system Using the Advanced surround ADV SURR ADVANCED SURROUND The Advanced surround feature creates a variety of surround effects. Try different modes with various soundtracks to see which you like. ACTION Designed for action movies with dynamic soundtracks. DRAMA Designed for movies with lots of dialog. F.S.S.ADVANCE (Front Stage Surround) Allows you to create natural surround sound effects using just the front speakers and the subwoofer.
5 Listening to your system Listening with Acoustic Calibration EQ Better sound using Phase Control • Default setting: ON You can listen to sources using the Acoustic Calibration Equalization set in Automatically setting up for surround sound (MCACC) on page 23. Refer to these pages for more on Acoustic Calibration Equalization.
5 Listening to your system Setting the Up Mix function (VSX-S510 only) In a 7.1-channel surround system with surround speakers placed directly at the sides of the listening position, the surround sound of 5.1-channel sources is heard from the side. The Up Mix function mixes the sound of the surround speakers with the surround back speakers so that the surround sound is heard from diagonally to the rear as it should be. • Using the Up Mix function is effective when the speakers in the 7.
5 Listening to your system Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold. Important • Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the current source, settings and status of the receiver. Setting/What it does Option(s) EQ (Acoustic Calibration EQ) Switches on/off the effect of Acoustic Calibration EQ. S.
5 Listening to your system Setting/What it does –3 to +3 Default: 0 (Panorama)f OFF DIMEN Adjusts the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings). PNRM. Extends the front stereo image to include surround speakers for a ‘wraparound’ effect. 4 Option(s) (Dimension)f 7 58 ON 0 to 10 C.
Chapter 6 Playback with NETWORK features (VSX-S510 only) Introduction This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your components to these terminals. Listening to Internet radio stations You can select and listen to your favorite Internet radio station from the list of Internet radio stations created, edited, and managed by the vTuner database service exclusively for use with the Pioneer products.
6 About HTC Connect This receiver features “HTC Connect”, a simple way to enjoy music content from your HTC Connect certified smart phone. 1 HTC Connect music streaming provided on this product has been developed based on interoperability testing as defined by the HTC Connect Certification program with the HTC Connect-compatible smartphones. 2 Music Navigation via the music progress bar is not currently supported with HTC Connect.
6 Listening to Internet radio stations Internet radio is an audio broadcasting service transmitted via the Internet. There are a large number of Internet radio stations broadcasting a variety of services from every corner of the world. Some are hosted, managed, and broadcast by private individuals while others are by the corresponding traditional terrestrial radio stations or radio networks.
6 Playback with NETWORK features (VSX-S510 only) The Network Setup menu Network Configuration Setting up the network to listen to Internet radio on this receiver. IP address/Proxy setting 1 HOME MENU. 2 Press Network Setup menu appears on your TV. Use /// Press NETWORK. and ENTER on the remote control to navigate through the screens and select menu items. Press RETURN to exit the current menu. • Press HOME MENU at any time to exit the Network Setup menu. the setting you want to adjust.
6 Playback with NETWORK features (VSX-S510 only) Friendly Name ‘Firmware Update’ from the Network Setup Language 1 Select menu. ‘Network Configuration’ from the Network Language can be set on the NETWORK function OSD screen. 1 Select Setup menu. The receiver checks whether the USB memory device Select ‘Language’ from the Network Setup menu. inserted into the USB port on the receiver’s front panel 1 Select ‘Friendly Name’ from the Network Configuration contains updatable firmware. 2 menu.
6 Playback with NETWORK features (VSX-S510 only) Launch Safari on your computer. 4 Bookmark. 7 Network setting using Safari browser Friendly Name setting using Safari browser 1 Bookmark icon. Click Bonjour list (a), and then 2 Press select this receiver’s name (Friendly Name) (b) in 1 Bookmark icon. Click Bonjour list (a), and then 2 Press select this receiver’s name (Friendly Name) (b) in Launch Safari on your computer. Bookmark.
6 Playback with NETWORK features (VSX-S510 only) the latest firmware on your computer (a) and 5 Browse then press Upload (b). The extension of the firmware is fw. Please select a file that has the fw extension. The confirmation screen is displayed. If you continue the firmware update, press OK. Once the firmware update process starts, you can't stop it. Wait until the file is uploaded (about one minute may be required depending on your LAN connection environment).
6 • Some functions may not be supported depending on the server type or version used. • Supported file formats vary by server. As such, files not supported by your server are not displayed on this unit. For more information check with the manufacturer of your server. Playback with NETWORK features (VSX-S510 only) Glossary aacPlus AAC decoder uses aacPlus developed by Coding Technologies. (www.codingtechnologies.
6 Playback with NETWORK features (VSX-S510 only) WAV (LPCM) .wav Apple Lossless Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch WMA (WMA2/7/8/9) .wmab Sampling frequency 32 kHz, 44.1 kHz, 48 kHz Quantization bitrate 16 bit Channel Bitrate VBR/CBR 2 ch 5 kbps to 320 kbps .m4a .mp4 Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch a.
Chapter 7 Home Menu Using the Home Menu The following section shows you how to make detailed settings to specify how you’re using the receiver, and also explains how to fine-tune individual speaker system settings to your liking. Important • If headphones are connected to the receiver, disconnect them. • VSX-S510: You can’t use the Home Menu when the NETRADIO, M.SERVER, FAVORITE, iPod/USB or ADAPTER input is selected. • VSX-S310 only: You can’t use the Home Menu when the iPod/USB input is selected.
7 • Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers). • Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer.
7 Home Menu the level of each channel using /. 5 Adjust If you selected Manual, use / to switch speakers. The Auto setup will output test tones in the order shown onscreen: 2c . C h an n el L evel F ro n t L C en t er F ro n t R Su rro u n d R Su rr. B ack R Su rr.
7 Home Menu The Auto Power Down menu Set to automatically turn off the receiver after a specified time has passed (when the power has been on with no operation for several hours). 1 Select ‘Auto Power Down’ from the Home Menu. H o m e Me nu 1 . Au t o M C AC C 2 . Manu al SP Set u p 3 . I n p u t A ssig n 4. Au to Power D own 5. H DM I Set u p 6. N e t wo rk St an d by 7. MHL Set u p 8. S p eaker Syst em 9. O S D Set u p 4 . Auto Power Down Auto Power Down OFF you’re finished, press RETURN.
7 Home Menu the ‘ARC’ setting you want. 2 Choose When a TV supporting the HDMI Audio Return Channel The OSD Setup menu (VSX-S510 only) Sets the overlay function ON/OFF. function is connected to the receiver, the sound of the TV can be input via the HDMI terminal. • ON – The TV’s sound is input via the HDMI terminal. • OFF – The TV’s sound is input from the audio input terminals other than HDMI inputs. 1 Select ‘OSD Setup’ from the Home Menu. Ho m e Me nu 9 . OS D S etup 1 . Au t o M C AC C 2 .
Chapter 8 Control with HDMI function (VSX-S510 only) Synchronized operations below with a Control with HDMIcompatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable. • Synchronized amp mode The receiver’s volume can be set and the sound can be muted using the TV’s remote control.
8 Control with HDMI function (VSX-S510 only) • LAST – The HDMI input signal selected previously will be output. • BD, DVD, SAT/CBL, DVR/BDR (VSX-S510 only), HDMI/MHL, GAME – The HDMI input signal selected here will be output. • OFF – Signal will not be output during standby. (However, when Control is set to ON, the HDMI signal is transferred through by the Control with HDMI function even when in the standby mode.
Chapter 9 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.
9 No sound is output or a noise is output when software with DTS is played back. Make sure the player’s settings are correct and/or the DTS signal out is on. Refer to the instruction manual supplied with the DVD player. There seems to be a time lag between the speakers and the output of the subwoofer. See Automatically setting up for surround sound (MCACC) on page 23 to set up your system again using MCACC (this will automatically compensate for a delay in the subwoofer output).
9 Audio playback is undesirably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver. - Check whether the audio file was recorded in a format supported by this receiver. - Check whether the folder has been damaged or corrupted. - Note that there are cases where even the audio files listed as playable on this receiver cannot be played back or displayed (page 49). The LAN cable is currently disconnected.
9 settings of the wireless LAN router, etc., then change the settings of the wireless LAN converter. Note, however, that making the advanced wireless LAN settings will not necessarily improve the wireless LAN environment. Be careful when changing the settings. The access point is set to conceal the SSID. In this case, the SSID may not be displayed on the access point list screen. If not, set the SSID, etc., by making the wireless LAN converter settings on the receiver manually.
9 HTC Connect HTC, HTC Connect and the HTC Connect logo are trademarks of HTC Corporation. About iPod/iPhone or iPad (VSX-S510 only) VSX-S310 VSX-S510 Additional information AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.
9 Additional information Status messages Descriptions License Error The license for the contents to be played back is invalid. Item Already Exists This is displayed when the file you have attempted to register in the Favorites folder has already been registered. Favorite List Full This is displayed when you have attempted to register a file in the Favorites folder but the Favorites folder is already full.
9 9 Specifications Audio section Rated power output (Front, Center, Surround and Surround back for VSX-S510) . . . . . . . . . . . . . . . . . . . 110 W per channel (1 kHz, 4 , 1 %) 65 W per channel (20 Hz to 20 kHz, 8 , 0.5 %) Total Harmonic Distortion . . . . . 0.08 % (20 Hz to 20 kHz, 8 , Rated Ouput –3 dB/ch) Frequency response (CD Pure Direct mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz to 20 kHz dB Guaranteed speaker impedance . . . . . . . . . . . . . . .
http://www.pioneer.co.uk http://www.pioneer.eu © 2013 PIONEER CORPORATION. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.