User Manual

1
4
2
33
4
Controls and displays
Front panel
1 INPUT SELECTOR dial
Selects an input source (page 18).
2 Receiver control buttons
SPEAKERS – Use to change the speaker system on or
off. When the SP OFF is selected, no sound is output
from the speakers connected to this receiver.
DIMMER – Dims or brightens the display. The brightness
can be controlled in four steps.
STATUS – Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
3 Character display
See Display on page 5.
4 Tuner control buttons
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 22
).
TUNER EDIT – Use with TUNE  /  , PRESET  / 
and
ENTER to memorize and name stations for recall
(page 22
).
TUNE  /  – Used to find radio frequencies (page 22).
PRESET  /  – Use to select preset radio stations
(page 23
).
5 HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 12
).
6 Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 7).
7 MASTER VOLUME dial
8 Í STANDBY/ON
9 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode.
10 AUX INPUT jack /SETUP MIC jack
Use to connect other equipment with a stereo mini jack.
Use to connect a microphone when performing Full Auto
MCACC setup (page 16
).
11 Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches
between Auto surround mode (page 24
) and Stream
Direct playback (page 25
).
ALC/STANDARD SURR – Press for standard decoding
and to switch between the modes of Pro Logic and
NEO:6, and the Auto level control stereo mode (page 24
).
ADVANCED SURROUND – Switches between the
various surround modes (page 25
).
12 ECO
Switches between ECO 1/ECO 2. When ECO Mode is turned
ON, the display will go dark (page 25
).
13 SOUND RETRIEVER
Turn Advanced Sound Retriever effect on/off.
14 USB terminal
Use to connect your USB mass storage device as an audio
source (page 15
).
VSX-532
34
1
5 726
8 10 1211 13 149
VSX-532_CDC_En.book 4 ページ ２０１７年１月１２日 木曜日 午後３時１２分