User manual

Playing 05
15
En
English
Français Español
Programming tracks
Note
• You can program up to 99 tracks.
• During programming, if no operation is made within 90
seconds, the system returns to the stop mode without
saving earlier operations.
For a CD
1 Press  to stop playback.
[T0], the total number of tracks, and the duration time are
displayed.
2 Press PROGRAM to activate the
programming.
[01 PR01] (the sequence number) are displayed with [01]
blinking.
3 Press / to select a track.
4 Press
PROGRAM again to program the
selected track.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press
 to start playback.
For WMA/MP3 files
1 Press  to stop playback.
[FXX] (XX indicates the total number of albums) and [XXX]
(XXX indicates the total number of tracks) are displayed.
2 Press PROGRAM to activate the
programming.
[01 PR01] are displayed with [01] blinking.
3 Press / repeatedly to select an album.
[FXX] (XX indicates the album number) are displayed.
4 Press / repeatedly to select a track.
[XXX] (XXX indicates the track number) are displayed.
5 Press PROGRAM again to confirm the
selected track.
6 Repeat steps 3 to 5 to program more tracks.
7 Press
 to start playback.
Erasing the program
 To erase the program,
• Switch to another source.
X-PM32_SYXE8_En.book 15 ページ ２０１４年７月１５日 火曜日 午後１２時１８分