Operation Manual

109
AppendixNAVI/AV
Memory Navi Mode
While the map disc is inserted, you can store the
data on the map disc into the memory of the
navigation unit. If the map disc is removed from
the navigation unit after the data is stored,
navigation is performed using the data in the
memory (memory navi mode). In the memory navi
mode, you can play a music CD or DVD-Video on
the navigation unit while navigation is taking
place.
The operation is automatically switched to the
memory navi mode when the map disc is
removed from the navigation unit.
Navigation in the memory navi
mode
During the memory navi mode, navigation is
performed only using the data read into the
memory. Therefore, some functions are restricted
compared with navigation using the map disc
(DVD navi mode). These function buttons, which
cannot be used in the memory navi mode, are
indicated in light grey. If you want to use these
functions, please insert the map disc again. In
addition, you may need to insert the map disc
and store new data in the memory during
navigation operation, such as when the
destination is far away.
The memory navi mode uses the following map
data to perform navigation.
The following are collectively known as Memory
Data:
• Manually downloaded memory area data in the
“Map In Memory” of the Settings menu
(Manual downloaded Memory Area)
• Automatically downloaded memory data of the
surrounding areas during the route search
(Auto downloaded Memory Area)
➲ Setting of the memory area ➞ Page 58
What is manual downloaded memory
area?
Memory area is the area of the map data, which
the user voluntarily read into the memory for the
memory navi mode. Normal guidance is available
if the memory area is registered and you drive
within the stored area.
What is auto downloaded memory
area?
This is the zone around the route in the map area
that is automatically stored in the memory when
the route is set. When the route distance is 120
km (74.5 mi) or shorter, a zone with a width of
approximately 17.5 km (10.9 mi) around the route
is stored. When the route distance is longer than
120 km, a zone with a width of approximately 10.6
km (6.6 mi) around the route is recorded. These
data are transmitted to the memory as you set the
route. When a new route is entered, the
memorised data are deleted.
The data read into the memory will not be deleted
even when the vehicle’s engine is turned off.
The memorised area may be deleted in the
following circumstances:
• Yellow lead of the navigation system or the
vehicle battery is disconnected.
• RESET button is pressed.
• Software is updated.
Navigation operation during the
memory navi mode
• ✓ : operation possible
•
" : operation restricted
• – : operation not possible
Main menu
Destination menu
Address Search –
Return Home –
Go to –
POI Search –
Vicinity Search –
Address Book –
Destination History –
Motorway Search –
Postal Code Search –
Cancel Route
✓
Traffic/Info menu
All Traffic –
Traffic On Route –
Overlay POI –
Traffic Settings
✓
Manual Station Search
✓
Route Options menu
Edit Current Route –
View Current Route
"
Recalculate –
Route No.
✓
MAN-CNDV-50MT-EN.book Page 109 Wednesday, May 4, 2005 1:49 PM