Operation Manual

119
AppendixNAVI/AV
Problems in the audio screen (common)
Problems in the audio screen (during DVD-Video playback)
Symptom Cause Action (See)
Playback is not possible. The disc is dirty. Clean disc. (
➞ “Hardware Manual”)
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
Non compatible video system disc is
loaded.
Change to a disc compatible to your
video system.
There’s no picture. The handbrake cord is not
connected.
Connect a handbrake cord, and apply
the handbrake.
The handbrake is not applied. Connect a handbrake cord, and apply
the handbrake.
There’s audio and video skipping. This unit is not firmly secured. Secure this unit firmly.
Rear display picture disappears. • The source disc being listened to
with the navigation system has been
ejected.
• The REAR button was pressed and
REAR ON mode switched off.
• There was a problem with the rear
display or a faulty wiring connection,
for example.
• Rear View is selected on the
screen.
• When the gearstick is in [R],
displays rear view camera images.
(When “NAVI” is selected in REAR
DISP menu.)
• Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
• Press the REAR button to turn
REAR ON mode on.
• Check the rear display and its
connection.
• Select view mode other than Rear
View.
• Move the gearstick other than turn
[R] position. (Select SOURCE in
REAR DISP menu.)
Nothing is displayed and the touch
panel keys cannot use.
The setting for the rear view camera
is incorrect.
The gearstick was placed in [R] when
the rear view camera was not
connected.
Connect a rear view camera
correctly.
Press NAVI/AV button to return to
the source display and then select
the correct setting for CAMERA.
➲ About CAMERA setting
➞
Page 96
Symptom Cause Action (See)
No sounds are heard.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The unit is performing still, slow
motion or frame-by-frame playback.
There is no sound during still, slow
motion or frame-by-frame playback.
“dts” is selected for the DVD-Video
disc sound track.
Switch to a non “dts” sound track.
The icon is displayed, and
operation is not possible.
The operation is prohibited for the
disc.
This operation is not possible.
The operation is not compatible with
the disc’s configuration.
This operation is not possible.
The picture stops (pauses) and the
unit cannot be operated.
Reading of data has become
impossible during playback.
After touching
( once, start playback
once more.
The picture is stretched, the aspect is
incorrect.
The aspect setting is incorrect for the
display.
Select the appropriate setting for
your display. (
➞ “Hardware Manual”)
Playback is not possible. The loaded disc has a different
region number from this unit.
Replace the disc with one featuring
the same region number as this unit.
(
➞ “Hardware Manual”)
A parental lock message is displayed
and playback is not possible.
Parental lock is on. Turn parental lock off or change the
level. (
➞ Page 93)
Parental lock cannot be cancelled. The code number is incorrect. Input the correct code number. (
➞
Page 93)
You have forgotten your code
number.
Touch “CLEAR” 10 times to cancel
the code number. (
➞ Page 93)
MAN-CNDV-50MT-EN.book Page 119 Wednesday, May 4, 2005 1:49 PM