Operation Manual

56
Chapter 5Customising Your Navigation System NAVI
• Voice Recognition
This setting controls whether the volume of the
Audio source is automatically muted during voice
operation.
On*:
During voice operation, the volume of the Audio
source is muted automatically.
Off:
The volume of the Audio source stays the same
during voice operation.
❒ If you select “Off”, the sound from the Audio
source may interfere with the voice
recognition system.
• Voice Guidance
This setting controls whether the volume of the
Audio source is automatically muted during voice
guidance.
On*:
During voice guidance, the volume of the Audio
source is muted automatically.
Off:
Volume of the Audio source stays the same
during voice guidance.
System Options
Touch “System Options” in the Setting Menu to
display.
Language Selection
➲ The language displayed can be set ➞
Page 107
Once you change the language, installation of
the program starts.
• Once the installation of the program starts,
do not stop the engine of your vehicle and
do not switch off the Navigation System
until the installation is completed and the
map of your surroundings appears.
KM Mile Setting
This setting controls the unit of distance
displayed on your Navigation System.
km*:
Show distances in kilometres.
Mile:
Show distances in miles.
Mile & Yard:
Show distances in miles and yards.
Voice Recog.Help
This setting controls the list of available voice
commands displayed during voice operation.
You should set “Voice Recog.Help” only when
the microphone of the voice recognition system
(sold separately) is connected.
On*:
The list of commands is shown.
Off:
The list of commands is not shown.
Auto Voice Recognition
After you have started the engine, turn on voice
recognition and set whether or not to perform all
operations up to route searching by voice.
(This function is effective only when a route is not
set.)
❒ You should set “Auto Voice Recognition”
only when the microphone of the voice
recognition system (sold separately) is
connected.
❒ In order to operate the navigation unit by
voice, you need the microphone kit (CD-VC1),
which is sold separately. Before connecting
the microphone, be sure to first turn the
ignition switch OFF (ACC OFF). When the
microphone is connected, turn the ignition
switch ON (ACC ON).
On:
The automatic voice recognition is engaged each
time your vehicle is started.
Off*:
Voice operation starts after touching VOICE
icon.
Average Speed
When calculating expected time of arrival and the
number of hours to the destination, set the
average speed for the motorway or ordinary road
using “+” and “–”.
MAN-CNDV-50MT-EN.book Page 56 Wednesday, May 4, 2005 1:49 PM