Operation Manual

82
Chapter 7Using the AV Source (Pioneer AV Equipments) AV
Setting the announcement
support interruption
1 Touch “AS” in the FUNCTION menu.
2 Touch “ANNOUNCE” or “WEATHER” to
turn the selected announcement support
interruption on.
Touching “ANNOUNCE” or “WEATHER”
switches between “ON” and “OFF”.
Receiving the road traffic flash and
transport flash
1 Press TA/NEWS button to turn road
traffic flash and transport flash on.
or appears in the display.
To turn the road traffic flash and transport
flash off, press TA/NEWS button again.
2 Press TA/NEWS button while the road
traffic flash and transport flash are being
received to cancel the announcement
interruption.
Receiving news flash
1 Press TA/NEWS button and hold to turn
news flash on.
Press TA/NEWS button until or
appears in the display.
To turn news flash off, press TA/NEWS
button and hold again.
Selecting services from the
available service list
Available service list lets you see the list of
available services and select one of them to
receive, if the currently received ensemble has
multiple services.
1 Touch “AS LIST” in the FUNCTION
menu.
2 Touch or to switch between the lists
of available services.
3 Touch your favourite available service on
the list.
That selection will begin to be received.
Searching for service by
available PTY information
Available PTY search lets you see the list of
available PTYs in the current ensemble and select
one of them to receive.
• If there is no available PTY in the current
ensemble, you cannot switch to the available
PTY search mode.
• Available PTY search is different from PTY
search. With navigation unit, you can operate
only the available PTY search.
1 Touch “PTY SEARCH” in the FUNCTION
menu.
2 Touch or to switch between the lists
of available PTYs.
3 Touch your favourite available PTY on
the list to begin the PTY search.
DAB receives the desired PTY service.
❒ The PTY method displayed is narrow. The
wide method cannot be selected when
using DAB as source.
❒ If no service broadcasting the selected
programming type is found, NOT FOUND
is displayed for about two seconds and
then the DAB returns to the previous
service.
Switching primary or secondary
service component
1 Touch “PR/2nd” in the FUNCTION menu.
2 Touch 4 or 6 to select the desired service
component.
Switching the service follow
1 Touch “SF” in the FUNCTION menu.
Touching “SF” switches between “ON” and
“OFF”.
Using dynamic label
Displaying dynamic label
➲ Switching screen display ➞ Page 98
DAB
MAN-CNDV-50MT-EN.book Page 82 Wednesday, May 4, 2005 1:49 PM