Manual

Connecting your equipment
9
En
English Français Español Italiano
Nederlands
Deutsch
Speaker connection
•The provided speaker wire with the red tube is for the plus
(+) terminal. Connect the wire with red tube to the plus
(+) terminal, and other wire to the minus (
–) terminal.
•Use speakers with an impedance of 4 ohms as lower
impedance speakers can damage the unit.
CAUTION
•These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the
unit.
• Do not let the bare speaker wires touch each other.
•Make sure that all the bare speaker wire is twisted
together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel, it
may cause the power to cut off as a safety measure.
If not using the provided speaker wire
Bare wire connections
1 Twist exposed wire strands together.
2 Loosen terminal and insert exposed wire.
3 Tighten terminal.
X-HM70 only:
• Do not install your speakers overhead on the ceiling or
wall. The grill is designed to be detachable, and as such it
may fall and cause damage or personal injury if installed
overhead.
• Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
•Do not stand or sit on the speakers. You may be injured.
Using other subwoofer
You can connect a subwoofer with an amplifier to the
SUBWOOFER PREOUT socket.
Note
• No sound is heard from the subwoofer without a built-in
amplifier.
Connecting iPod or iPhone to TV
Photo and video files from iPod or iPhone can be viewed by
connecting the system to TV/monitor. If the TV/monitor has a
video input, connect it to the VIDEO OUT socket at the back
of the unit and set the TV Out on the iPod or iPhone unit to
“ON” position.
Note
•Please make sure to set iPod unit to either NTSC or PAL
to match your TV signal. Please visit Apple’s homepage
for further information.
• The video images from the iPod or iPhone will only be
viewed when the iPod or iPhone is docked in the unit.
Connecting a TV, etc.
Connect to the TV using an audio cable.
To select Line In function:
• On main unit: Press INPUT button repeatedly until Line In
is displayed.
•On remote control: Press LINE button.
12 3
10 mm
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
0.6 A MAX)
LAN
(
10/100
)
FM
UNBAL
75
Ω
SPEAKERS
AM
LOOP
ANTENNA
OUT
IN
PREOUT
L
R
VIDEO LINE
SUBWOOFER
Main unit
Audio cable
(commercially
available)
Audio signal
To audio input
socket
To SUBWOOFER
PREOUT socket
Commercially
available subwoofer
(amplifier built in)
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
0.6 A MAX)
LAN
(
10/100
)
FM
UNBAL
75
Ω
SPEAKERS
AM
LOOP
ANTENNA
OUT
IN
PREOUT
L
R
VIDEO LINE SUBWOOFER
Audio signal
TV To audio
output sockets
Audio cable
(commercially
available)
Main unit
To LINE
input
sockets
X-HM70_En.book 9 ページ ２０１１年７月１１日 月曜日 午前９時２３分