Operation Manual

Listening to the iPod/iPhone/iPad mini
19
En
Listening to the iPod/
iPhone/iPad mini
Supported models
• iPod touch (5th/4th/3rd/2nd/1st generation)
• iPod nano (7
th/6th/5th/4th/3rd generation)
• iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G,
iPhone
•iPad mini
Important
• Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising from
any inconvenience or loss of recorded material resulting
from the iPod/iPhone/iPad mini failure.
Note
• This system has been developed and tested for the
software version of iPod/iPhone/iPad mini indicated on
the website of Pioneer (http://pioneer.jp/homeav/support/
ios/eu/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone/iPad mini may
result in incompatibility with this system.
• iPod/iPhone/iPad mini is charged if it is connected to the
CD player when the power of the CD player is on.
• iPod/iPhone/iPad mini is licensed for reproduction of
non-copyrighted materials or materials the user is legally
permitted to reproduce.
Connecting your iPod/iPhone/iPad mini
CAUTION
• Unplug all accessories from the iPod/iPhone/iPad mini
before connecting it to the CD player.
1 Turn on the stereo receiver and CD player.
Refer to To turn the power on on page 13 for details.
2 Press the CD/USB button on the remote control to select
the CD/USB input for the stereo receiver.
You can also select the CD/USB input by pressing the INPUT
button on the remote control repeatedly, or turning the
SOURCE knob on the stereo receiver.
3 Press the CD USB button on the remote control to
select iPod/USB function for the CD player.
You can also select the iPod/USB function by pressing the
CD/USB button on the CD player.
4 Connect the USB connector cable (commercially
available) to an iPod/iPhone/iPad mini.
5 Connect the iPod/iPhone/iPad mini to the CD player via
USB connector.
“Loading” appears on the display panel as the CD player
starts recognizing the connected iPod/iPhone/iPad mini.
When the track number is displayed, the files in the iPod/
iPhone/iPad mini are ready to be played back.
Note
• USB connector do not support VIDEO out.
Important
• If “No Device” is displayed or an iPod/iPhone/iPad mini
does not work properly after connecting the iPod/iPhone/
iPad mini to the CD player and selecting the iPod/USB
mode, turn off the CD player and reconnect the iPod/
iPhone/iPad mini to the CD player.
If it still does not work properly, try resetting the iPod.
Playing an iPod/iPhone/iPad mini
The buttons on the remote control and the CD player can be
used for controlling an iPod/iPhone/iPad mini.
Function
On CD
player
Remote
control
Operation
Display
the menu
− TOP
MENU
Press the CONTROL
CD
button first, and
press to access the iPod/
iPhone/iPad mini menu.
Navigate
/Confirm
−
//
ENTER
Press the CONTROL
CD
button first, and use
to control the iPod/
iPhone/iPad mini menu.
Play
Press in the stop/
pause mode.
Stop/
Pause
Press in the playback
mode. Press the  or
 button to resume
playback from the
paused point.
Track up/
down
Press in the playback
or stop/pause mode.
If you press the button
in the stop/pause
mode, press the  or
 button to start
playback of the
desired track.
Fast
forward/
reverse
Press and hold in the
playback mode.
Release the button to
resume playback.
REPEAT
− REPEAT Press to repeat the
playback of files.
*1
*1
See Repeat play on page 16 for details.
SHUFFLE
− SHUFFLE Press to play back files
in random order.
*2
*2
See Shuffle play on page 17 for details.