Operation Manual

Connecting42
En
Connecting
2
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
To use this function:
- Your TV must support the ARC function.
- The setting method of ARC may differ
depending on the TV. For details about ARC
function, refer to your TV manual.
- You must use the HDMI cable (High Speed
HDMI
®
/™ Cable).
- You must connect with the HDMI IN of TV
that supports the ARC function using the
HDMI OUT on this player.
- You can connect only one Home Theater to
TV compatible with ARC.
- The ARC function does not warrant that the
function works in all cases even if the above
conditions are satisfied.
- WhenyouusetheARCfunction,CEC
(Consumer Electronics Control) may work.
If you do not want to use CEC, you can stop
it work by setting
[Control: O]
on
HDMI
. In
this case, it is needed to connect TV and this
player by an optical cable to send the audio
stream to this player.
- Power on the unit when using CEC function.
- CEC does not operate during Standby mode.
Video connection
Connect the
VIDEO OUT
terminal on the player
to the video in terminal on the TV using a video
cable. You can hear the sound through the
system’s speakers.
Rear of the unit
TV
Video cable