Operation Manual

Connect to network 04
21
En
6 From the menu on the left, select “Network
Configuration”.
If you wish to change the Friendly Name, select “Friendly
Name” from the menu and change the name before selecting
“Network Configuration.”
7 When the Auto/Manual selection screen
appears, select “Auto.”
If you are manually inputting the SSID or setting a fixed IP
with a wired connection, select “Manual.” For details, see
Network Configuration on page 27.
8 Select your router's SSID.
If the SSID does not appear, either repeat step (6), or use step
(7) to select Manual and input the SSID manually.
9 If you are asked to input a password, input
it here.
Also, if input of a fixed IP is required, set DHCP to OFF here
and make the setting.
10 When settings are completed, click on
Apply.
The unit will automatically power down. Confirm that the
router’s power is ON.
If you intend to use the unit in a wired configuration, use a
LAN cable to connect the unit to the router.
11 Press  standby/on button.
The on indicator will flash blue. When the connection is
completed, the network indicator will change from flashing
red to steadily lighted blue.
The indicator will flash blue when the signal is weak.
The settings are completed.
S1000.1000.0
XW-SMA1
XX:XX
X:X
XXX:XXX
X:X
X:X
input
volume
standby/on
6
on
input
network
blue