Operation Manual FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER AVIC-Z110BT Notice to all users: This software requires that the navigation system is properly connected to your vehicle’s parking brake and depending on your vehicle, additional installation may be required. For more information, please contact your Authorized Pioneer Electronics retailer or call us at (800) 421-1404.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Important The screens shown in the examples may differ from actual screens. Actual screens may be changed without notice for performance and function improvements. Introduction Information to User 9 License Agreement 10 – PIONEER AVIC-Z110BT - for U.
Contents – Scrolling the map to the position you want to see 42 – Quick Access 42 Customizing the map screen settings Setting the Item on the Map Screen 44 – Setting “Close Up View” 44 – City Map 44 – Setting the switching of the city map display 44 – Show Traffic Incident 45 – Bluetooth Connected 45 – Setting the current street name display 45 – Setting the Favorites icon display 45 – 3D Land Mark 45 – Displaying maneuvers 45 – MSN Direct 46 Displaying POI on the map 46 – Displaying preinstalled POIs on t
Contents – Exporting the entry in “Favorites” 66 – Importing the “Favorites” items edited on AVIC FEEDS 66 Deleting an entry in “History” 67 Browsing information on MSN Direct Activating the service 68 – Checking your product key 68 – Subscribing to the MSN Direct service 69 – Activating the MSN Direct function 69 Browsing gas prices 69 Browsing movie times 70 – Searching for a theater by selecting a movie title 70 – Searching for a movie title by selecting a theater 71 Browsing weather information 71 – Ch
Contents Notes for hands-free phoning 92 Customizing preferences The options in the “Navi Settings” menu 94 – Displaying the “Navi Settings” screen 94 – Checking the connections of leads 94 – Checking sensor learning status and driving status 94 – Using the “Gas Mileage” function 96 – Recording your travel history 97 – Using the demonstration guidance 98 – Registering your home 98 – Correcting the current location 98 Options on the “System Settings” menu 98 – Displaying the “System Settings” screen 98 – Cu
Contents – Searching for a specific scene and starting playback from a specified time 120 – Direct number search 120 – Operating the DVD menu 120 – Using DVD menu by touch panel keys 120 – Frame-by-frame playback 121 – Slow motion playback 121 Using the “Function” menu 121 Playing a DVD-VR disc Reading the screen 123 Using the touch panel keys 123 – Searching for a specific scene and starting playback from a specified time 124 – Switch the playback mode 125 – Using the short-time skip function 125 – Playin
Contents – Displaying the Radio ID 149 – Storing and recalling broadcast stations 150 – Selecting a channel from the list 150 – Using “My Mix” function 150 – Using the direct traffic announcement function 151 Using the “Function” menu 151 – Setting the memorized songs 152 Using the SIRIUS tuner Reading the screen 153 Using the touch panel keys 153 – Selecting a SIRIUS channel directly 154 – Display the Radio ID 154 – Storing and recalling broadcast stations 155 – Using “My Mix” function 155 – Using the dir
Contents – Voice commands related to hands-free phoning 175 Tips for Voice Operation 176 Other functions Setting the anti-theft function 177 – Setting the password 177 – Entering the password 177 – Deleting the password 177 – Forgotten password 177 Restoring the default setting 178 Returning the navigation system to the initial state 178 Returning the navigation system to the default or factory settings 178 – Setting items to be deleted 179 Appendix Troubleshooting 181 Messages and how to react to them 186
Chapter Introduction This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
Chapter 01 Introduction License Agreement PIONEER AVIC-Z110BT - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter Introduction 4 EXPORT LAW ASSURANCES You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States.
Chapter 01 Introduction PIONEER AVIC-Z110BT - for Canada THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter Introduction obtained by you outside of Canada, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of Canada and the laws and regulations of the jurisdiction in which you obtained the Software.
Chapter 01 Introduction Terms and Conditions for the Tele Atlas Data THIS IS A LEGAL AGREEMENT (THE “AGREEMENT”) BETWEEN YOU, THE END USER, AND TELE ATLAS NORTH AMERICA, INC. (“Tele Atlas”). BY USING YOUR COPY OF THE TELE ATLAS DATA, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. 1 Grant of License.
Chapter Introduction 7 U.S. Government Rights. If you are an agency, department, or other entity of the United States Government, or funded in whole or in part by the United States Government, then use, duplication, reproduction, release, modification, disclosure or transfer of this commercial product and accompanying documentation, is restricted in accordance with the LIMITED or RESTRICTED rights as described in DFARS 252.
Chapter 01 Introduction In addition to the Warranties contained in the Agreement, YOU UNDERSTAND THAT THE POIS ARE LICENSED ON AN “AS IS” BASIS WITHOUT GUARANTEE, AND THERE ARE NO OTHER WARRANTIES MADE WHETHER, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. e POIs Segregation. You are prohibited from combining or merging the POIs with any other POI data.
Chapter Introduction 01 Introduction Licenses En 17
Chapter 01 18 Introduction En
Chapter Introduction 01 Introduction En 19
Chapter 01 20 Introduction En
Chapter Introduction 01 Introduction En 21
Chapter 01 Introduction About the database About the Data for the Map Database ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! For more details about the map coverage of this navigation system, refer to the information on our website.
Chapter Introduction WARNING ! Do not attempt to install or service your navigation system by yourself. Installation or servicing of the navigation system by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards.
Chapter 01 Introduction p Failure to set correct information about the local time may result in the navigation system providing improper routing and guidance instructions. p Never set the volume of your navigation system so high that you cannot hear outside traffic and emergency vehicles. p To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.
Chapter Introduction When you attempt to watch “Video image” while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch “Video image” on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.
Chapter 01 Introduction After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. ! U.S.A Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.
Chapter Introduction Definitions of terminology “Front Display” and “Rear Display” In this manual, the screen that is attached to the body of this navigation unit will be referred to as the “Front Display”. Any additional optional screen that is purchased for use in conjunction with this navigation unit will be referred to as the “Rear Display”.
Chapter 01 Introduction p In this manual, iPod and iPhone will be referred to as iPod. p When you use this navigation system with a Pioneer USB interface cable for iPod (CDIU50V) (sold separately), you can control an iPod compatible with this navigation system. p To obtain maximum performance, we recommend that you use the latest software for the iPod. p Operation methods may vary depending on the iPod models and the software version of iPod.
Chapter Basic operation 02 Checking part names and functions 7 6 Basic operation This chapter gives information about the names of the parts and the main features using the buttons. 5 4 3 2 1 8 9 1 LCD screen 2 OPEN CLOSE button 3 TRK (c/d) button Press to perform manual seek tuning, fast forward, reverse and track search controls.
Chapter 02 Basic operation = For more details, refer to the descriptions from Chapter 14 to Chapter 30. 4 MODE button ! Press to switch between the map screen and the AV operation screen. ! Press to display the map screen while the navigation function screen is displayed. ! Press and hold to display the “Picture Adjustment” screen. = For details, refer to Operating the picture adjustment on page 160.
Chapter Basic operation Ejecting a disc 1 Press the OPEN CLOSE button. The “Monitor Setup” screen appears. 2 Touch [Disc Eject]. The LCD panel opens, and the disc is ejected. 3 Press the OPEN CLOSE button. The LCD panel closes. Inserting a disc 1 Press the OPEN CLOSE button. The “Monitor Setup” screen appears. Basic operation ! Do not operate this navigation system until the LCD panel completely opens or closes.
Chapter 02 Basic operation 2 Touch [SD Insert]. The LCD panel opens, and the SD card slot appears. 2 Touch [Eject SD]. The following message appears. 3 Insert an SD memory card into the SD card slot. Insert it with the label surface facing to the upside and press the card until it clicks and completely locks. 3 Touch [Yes]. The navigation system restarts, and then the LCD panel opens. 4 Press the SD memory card until it clicks. 5 Pull out the SD memory card. 6 Press the OPEN CLOSE button.
Chapter Basic operation 02 Plugging in a USB storage device USB connector 1 Pull out the USB storage device after checking that no data is being accessed. Basic operation % Plug a USB storage device into the USB connector. p A USB interface cable for iPod (CD-IU50V) (sold separately) is required for connection. USB storage device p Compatibility with all USB storage device is not guaranteed. This navigation system may not achieve optimum performance with some USB storage devices.
Chapter 02 Basic operation 2 Turn off the vehicle engine to terminate the system. The navigation system is also turned off. 4 Read the disclaimer carefully, checking its details, and then touch [OK] if you agree to the conditions. On first-time startup When you use the navigation system for the first time, select the language that you want to use. 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds.
Chapter Basic operation 02 Basic operation En 35
Chapter 03 How to use the navigation menu screens Screen switching overview 2 4 3 1 5 6 36 En 7
Chapter How to use the navigation menu screens What you can do on each menu Press the MODE button to display the navigation map screen. 7 AV operation screen This is the screen that normally appears when you play the AV source. Touching the icon on the top left corner displays the “AV Source” menu. p To return to the previous screen, touch . Operating list screens (e.g. POI list) 1 Classic Menu 4 5 2 3 Shortcut Menu p In this manual, “Classic Menu” will be referred to as “Top Menu”.
Chapter 03 How to use the navigation menu screens Selecting the Shortcut p Up to 15 menu items can be registered in shortcuts. 1 Press the HOME button repeatedly to display the “Shortcut Menu” screen. 2 Touch [Shortcut]. The Short-Cut Selection screen appears. Displaying the rear view camera image Rear view image is displayed on the left-hand side of the screen, while the map of your surroundings is indicated on the right. = For details, refer to Setting for rear view camera on page 101.
Chapter How to use the map 04 Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map. How to read the map screen 1 How to use the map This example shows an example of a 2D map screen. h g 4 f e d c b 5 a 2 3 6 7 p Information with the mark (*) appears only when the route is set. p Depending on the conditions and settings, some items may not be displayed.
Chapter 04 How to use the map = For details, refer to Setting the current street name display on page 45. 8 Extension tab for the AV information bar Touching this tab opens the AV information bar and enables you to briefly view the current status on the AV source. Touching it again retracts the bar. 9 Shortcut to the AV operation screen The AV Source currently selected is shown. Touching the indicator displays the AV operation screen of the current source directly.
Chapter How to use the map Enlarged map of the intersection When “Close Up View” in the “Map Settings” screen is “On”, an enlarged map of the intersection appears. 04 2 Freeway exit information Displays the freeway exit. 3 Freeway signs These show the road number and give directional information. Operating the map screen = For details, refer to Setting “Close Up View” on page 44.
Chapter How to use the map 04 The map display always shows the vehicle’s direction as proceeding toward the top of the screen. ! North up: The map display always has north at the top of the screen. p The map orientation is fixed at “North up” in the following situation. — When the map scale is 25 miles (50 kilometers) or more. p The map orientation is fixed at “Heading up” in the following situation. — When the 3D map screen is displayed. 1 Display the map screen. 2 Touch on the map screen.
Chapter How to use the map % When the map is displayed, touch 04 . = For details, refer to Calling a number in the “Contacts List” on page 85. [Close] Hides the Quick Access menu. How to use the map Quick Access menu : Route Options* Displayed when the map is not scrolled. This item can be selected only during route guidance. You can modify the conditions for route calculation and recalculate the current route. = For details, refer to Modifying the route calculation conditions on page 55.
Chapter Customizing the map screen settings 05 The general settings related with a map screen can be customized. To customize the map screen, display the “Map Settings” screen. 1 Display the “Top Menu” screen. 2 Touch [Settings]. The “Settings Menu” screen appears. Setting “Close Up View” This setting enables switching to an enlarged map around the point where your vehicle is approaching an intersection, entrance/exit of freeway or a junction. % Touch [Close Up View].
Chapter Customizing the map screen settings Displays a city map when the area displayed on the map falls entirely within the city map area. Show Traffic Incident Selects whether to display or hide the traffic notification icons on the map when incidents occur on your route. ! [View] (default): Displays the icons on the map. ! [Hide]: Hides the icons on the map. = For details, refer to Checking traffic information manually on page 74.
Chapter Customizing the map screen settings 05 % Touch [Show Manuever]. Each time you touch the key changes that setting. ! [View] (default): Displays the next turn ahead of the vehicle on the map. ! [Hide]: Hides the next turn ahead of the vehicle on the map. 3 MSN Direct Selects whether to display or hide the received MSN Direct information on the map. p Following informations are displayed: — Gas Prices — Movie Times — Local Events p MSN Direct icons are not displayed when the map scale is 0.
Chapter Customizing the map screen settings 05 # If you want to search with more detailed categories, touch [Detail]. Touch the item and touch [OK]. When only a few types of the detailed categories are selected, blue check marks will appear. Touch [Display] to turn it [On]. p If you do not want to display the POI icon on the map, touch [Display] to turn it [Off]. (Even if [Display] is turned [Off], the POI selection setting is retained.) p When subcategory is selected, [Detail] is not available.
Chapter Customizing the map screen settings 05 p This mode is available when [Camera] is set to “On”. = For details, refer to Setting for rear view camera on page 101. 3D map screen Setting the map color change between day and night Street View To improve the visibility of the map during the evening, you can set the timing for changing the combination of the map color. 1 Display the “Map Settings” screen. 2 Touch [Day/Night Display]. Each time you touch the key changes that setting.
Chapter Customizing the map screen settings Changing the setting of navigation interruption screen ! Set whether to automatically switch to the navigation screen from the AV operation screen when your vehicle approaches a guidance point such as an intersection while displaying a screen other than navigation. Display the “Map Settings” screen. 2 Touch [AV Guide Mode]. Each time you touch the key changes that setting. ! ! [On] (default): Switches from the audio operation screen to the navigation screen.
Chapter Setting a route to your destination 06 CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route. p Some information regarding traffic regulations depends on the time when the route calculation is performed.
Chapter Setting a route to your destination When the route calculation is completed, “Route confirmation screen” appears. Route confirmation screen 06 Modifying the route calculation conditions You can modify the conditions for route calculation and recalculate the current route. 1 Touch [Options] on the “Route confirmation screen”. The “Route Options” screen appears.
Chapter 06 Setting a route to your destination Avoid Toll Road This setting controls whether toll roads (including toll areas) should be taken into account. [Off]*: Calculate a route that may include toll roads (including toll areas). [On]: Calculate a route that avoids toll roads (including toll areas). p The system may calculate a route that includes toll road even if [On] is selected. Avoid Ferry This setting controls whether ferry crossings should be taken into account.
Chapter Setting a route to your destination p When you set waypoints in the route to your destination, the route up to the next waypoint will appear in light green. The rest of the route will appear in light blue. = For details concerning operations, refer to Adding a waypoint on the next page. 06 4 Touch [OK] on the “Waypoints List” screen. The route is recalculated, and “Route confirmation screen” appears. 1 Touch [Waypoints] on the “Route confirmation screen”. The “Waypoints List” screen appears.
Chapter Checking and modifying the current route 07 You can check the route details. You can also recalculate the route in different conditions. 1 Display the “Top Menu” screen. 2 Touch [Destination]. The “Destination Menu” screen appears. 3 Touch [Route Overview]. The “Route Overview” screen appears. Editing waypoints You can edit waypoints (locations you want to visit on the way to your destination) and recalculate the route so that is passes through these locations.
Chapter Checking and modifying the current route 4 Touch [OK] on the “Waypoints List” screen. The route is recalculated, and “Route confirmation screen” appears. Deleting a waypoint You can delete waypoints from the route and then recalculate the route. (You can delete waypoints successively.) 1 Display the “Waypoints List” screen. 2 Touch [Delete] next to the waypoint that you want to delete. The touched waypoint will be deleted from the list. 3 Touch [OK] on the “Waypoints List” screen.
Chapter Checking and modifying the current route 07 # Touch [No]. The previous screen returns without deleting the route. = For details concerning operations, refer to Modifying the route calculation conditions on page 51. Canceling the route guidance If you no longer need to travel to your destination, follow the steps below to cancel the route guidance. 1 Display the “Destination Menu” screen. 2 Touch [Cancel Route]. A message confirming the cancellation of the current route appears.
Chapter Searching for and selecting a location CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route. 1 Press the HOME button to display the “Top Menu”. ! Finding the location by specifying the house number To search for a location, display the “Address Search” screen. 1 Display the “Destination Menu” screen. 2 Touch [Address].
Chapter 08 Searching for and selecting a location 8 Touch the desired house number range. The searched location appears on the map screen. Finding the location by specifying the house number p Depending on the search results, some steps may be skipped. 3 Enter the city name and then touch [OK]. The “Select City” screen appears. 4 Touch the desired city name. The “Street Name” screen appears. # Touch . The representative location of the city appears on the map screen.
Chapter Searching for and selecting a location 08 Entering three keywords The names including the following two words below are displayed as a result: ! The words that match with both first and second keywords you entered. ! The word beginning with the third keyword. e.g. Searching “East West Street”. 6 Enter the city name and then touch [OK]. The “Select City” screen appears. # Touch . The representative location of the city appears on the map screen. 8 Touch the desired house number range.
Chapter Searching for and selecting a location 08 Searching for Points of Interest (POI) State code key Information about various facilities (Points Of Interest - POI), such as gas stations, parking lots or restaurants, is available. You can search for a POI by selecting the category (or entering the POI Name). To search for POIs, display the “POI Search” screen. 1 Display the “Destination Menu” screen. 2 Touch [POI]. The “POI Search” screen appears.
Chapter Searching for and selecting a location 3 Touch the category you want. The “POI List” screen appears. 08 State code key p If there are more detailed categories within the selected category, repeat this step as many times as necessary. 4 Touch the POI you want. The searched location appears on the map screen. Searching for POIs around the destination p This function is available when the route is set. Display the “POI Search” screen. 2 Touch [Near Destination].
Chapter Searching for and selecting a location 08 = For details, refer to Registering a location into “Favorites” on page 64. 1 The “Destination Menu” screen appears. 2 Touch [Favorites]. The “Favorites” screen appears. 3 Touch the entry you want. The searched location appears on the map screen. Searching for POIs by using the data on the SD memory card Creating a customized POI is possible by using the utility program “AVIC FEEDS” which is available separately, on your PC.
Chapter Searching for and selecting a location 08 3 Touch [East] or [West], and then enter the longitude. To enter W 50°1’2.5” for example, touch [West], [0], [5], [0], [0], [1], [0], [2], and [5]. Searching for and selecting a location 4 Touch [North] or [South], and then enter the latitude. To enter N 5°1’2.5” for example, touch [North], [0], [5], [0], [1], [0], [2], and [5]. 5 Touch [OK]. The searched location appears on the map screen.
Chapter Registering and editing locations 09 Registering a location into “Favorites” 2 Touch menu. Registering a location by “Favorites” 3 Touch . The location is registered, and then the “Edit Favorite” screen appears. Favorites can store up to 400 registered locations. These can include your home location, favorite places, and destinations you have already registered. 1 Display the “Destination Menu” screen. 2 Touch [Favorites]. The “Favorites” screen appears. 3 Touch [Add].
Chapter Registering and editing locations Editing your home When you have already registered your home, you can edit the information of your home. 1 09 3 Touch [Sort]. Each time you touch [Sort] changes the sort order. p Current order is displayed on the upper right of the screen. ! : Sorts the items in the list in order by distance from the vehicle position. ! : Sorts the items in the list alphabetically. ! : Sorts the items in the list in order of the recently used items.
Chapter Registering and editing locations 09 Displayed when all locations are selected. Cancels all selected locations. After exporting the data is finished, the following message appears. 5 Touch [Delete]. A message will appear asking you to confirm the deletion. 5 Touch [OK]. The “Favorites” screen appears. 6 Touch [Yes]. The data you selected is deleted. # Touch [No]. Cancels the deletion.
Chapter Registering and editing locations 09 5 Touch [Yes]. Data import starts. After importing the data is finished, the “Favorites” screen appears. 5 Touch [Delete]. A message will appear asking you to confirm the deletion. Deleting an entry in “History” # Touch [No]. Cancels the deletion. 6 Touch [Yes]. The data you selected is deleted. Items in History can be deleted. All entries in History can be deleted at once. 1 Display the “Destination Menu” screen. 2 Touch [History].
Chapter 10 Browsing information on MSN Direct If you have an active subscription to MSN Direct service, you can check and browse various information on your navigation system, such as gas prices, movie times, weather conditions and traffic information. The information will be updated periodically. IMPORTANT: To receive MSN® Direct on an MSN Directready device, you must be within an MSN Direct coverage area; see http://www.msndirect. com/pioneer for current coverage maps.
Chapter Browsing information on MSN Direct Subscribing to the MSN Direct service Within two days of completing the subscription, execute Activating the MSN Direct function. 1 Access the following URL and read the description. http://www.msndirect.com/pioneer 2 Be sure to check the coverage area and other availabilities of MSN Direct on the web page. 3 Go to the page for activation and enter your product key. 4 Follow the directions on the web page to complete the subscription.
Chapter 10 Browsing information on MSN Direct Sorts the items in the list by price. # Touch [Refresh]. The information is updated. p [Refresh] appears when new gas prices information is received. Searching for a theater by selecting a movie title 4 Touch on the item that you want to view in detail. 2 Touch [Movie Times]. The “All Movie Theaters” screen appears. # Touch . “Location confirmation screen” appears. = For details, refer to Checking the location on the map on page 50.
Chapter Browsing information on MSN Direct ! [Name]: Sorts the items in the list alphabetically. p [Refresh] appears when the new information is received. 6 Touch on the item that you want to view in detail. 5 Touch on the item that you want to view in detail. # Touch . “Location confirmation screen” appears. = For details, refer to Checking the location on the map on page 50. 6 Touch [OK]. “Location confirmation screen” appears. 7 Touch [OK]. “Location confirmation screen” appears.
Chapter 10 Browsing information on MSN Direct Using traffic information The city name, weather, temperature and wind direction are displayed in list format. 3 Touch the desired area. Detailed information is displayed. Touching [Forecast] displays the weather forecasts for these three days. Viewing the traffic event Checking worldwide weather conditions Traffic Information is displayed on a screen in the form of a list.
Chapter Browsing information on MSN Direct 10 been removed, the list is updated to reflect the new situation. # Touch . Touching allows you to check the location on a map. (Traffic information without positional information cannot be checked on a map.) 4 Touch . The previous screen returns. 3 Select an incident you want to view in detail. The details of the selected incident are displayed. All traffic information on the current route is displayed on screen in a list. % Touch [Traffic On Route].
Chapter Browsing information on MSN Direct 10 with black line: Closed/blocked roads ! etc.: Accidents, constructions, etc. 1 Touch [New]. The recommended route is displayed on the screen. Setting an alternative route to avoid traffic congestion 2 Touch [OK]. The displayed route is set. ! # Touch [Current]. The current route is displayed on the screen. The navigation system checks whether or not there is the traffic information on your route at regular time intervals.
Chapter Browsing information on MSN Direct p [Diversion] will be enable only when the system can find “traffic congestion”. p “Notification icon” shows the nearest traffic information on the route. However, if you touch [Diversion], the route is recalculated by taking into account not only this information, but also all traffic congestion information on the route. For the subsequent operations, see “Checking for traffic congestion automatically”.
Chapter 10 Browsing information on MSN Direct 4 Touch the traffic information item to display. A check mark appears by the selected traffic information.
Chapter Browsing information on MSN Direct 10 The information is updated. p [Refresh] appears when the new information is received. 8 Touch [OK]. “Location confirmation screen” appears. 3 Touch the date on which you want to check the events. The “Local Event Groups List” screen appears. 4 Touch the category of events that you want to check. The “Local Event Sub Groups List” screen appears. 6 Touch the desired tab to change the sort order. Available options: ! [Dist.
Chapter Browsing information on MSN Direct 10 3 Touch [Add]. The “Stock Info” screen appears. 4 Enter the stock symbol that you want to select, and then touch [OK]. The selected stock symbol is added to the “Stock Info” screen. # Touch [Refresh]. The information is updated. p [Refresh] appears when the new information is received. 4 Touch or to scroll the list. Viewing the detailed stock quotes 1 Touch [Destination] on the “Top Menu”, and then touch [MSN Direct].
Chapter Registering and connecting the Bluetooth device If your devices feature Bluetoothâ technology, this navigation system can be connected to your devices wirelessly. This section describes how to set up a Bluetooth connection. For more information about the connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.
Chapter 11 Registering and connecting the Bluetooth device The system searches for devices featuring Bluetooth technology that are waiting for the connection and displays them in the list if the device has found. p Up to 30 devices will be listed in the order that the devices are found. 4 Wait until your Bluetooth device appears in the list. p If you cannot find the Bluetooth device that you want to connect, check that the device is waiting for the Bluetooth wireless technology connection.
Chapter Registering and connecting the Bluetooth device 11 and requesting connection from the Bluetooth device. 1 Activate the Bluetooth wireless technology on your devices. For some Bluetooth devices, no specific action is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices. p If you cannot find the desired device name on the list, touch [Other phones] to search the devices available nearby.
Chapter 11 Registering and connecting the Bluetooth device Deleting a registered device When you have already registered 5 Bluetooth devices and you want to add another one, you must first delete one of the registered devices. p If a registered phone is deleted, all the phone book entries and call history lists that correspond to the phone will be also cleared. 1 Display the “Bluetooth Settings” screen. 2 Touch [Registration]. The following message appears. connection.
Chapter Registering and connecting the Bluetooth device 11 5 Touch the profile that you want to connect. You can select the following profiles: ! [Handsfree and Audio]: Connects the device as the hands-free phone and the Bluetooth audio player. ! [Audio]: Connects the device as Bluetooth audio player. ! [Handsfree]: Connects the device as the hands-free phone. Connection starts.
Chapter 12 Using hands-free phoning 2 : Network name of the cellular phone company 3 : Strength of the Bluetooth connection between the navigation system and the device 4 : Reception status of the cellular phone 5 : Battery status of the cellular phone CAUTION For your safety, avoid talking on the phone as much as possible while driving. If your cellular phone features Bluetooth technology, this navigation system can be connected to your cellular phone wirelessly.
Chapter Using hands-free phoning Making a call home easily You can call home without taking the time to enter the phone number if the phone number has been registered. 1 Display the “Phone Menu” screen. 2 Touch [Call Home]. Dialing home starts. p If you have not registered your home number, a message appears. Touch [Register] to start registration. = For details, refer to Registering your home on page 98. Calling a number in the “Contacts List” 1 Display the “Phone Menu” screen. 2 Touch [Contacts].
Chapter Using hands-free phoning 12 3 Touch an entry on the list. Dialing starts. p To cancel the call after the system starts dialing, touch . # Touch [Detail]. The “Detailed Information” screen appears. You can check the details of the party before making a phone call. 4 You can check the details of the party before making a phone call. 4 Touch to end the call. Making a phone call using the dialed number history The dialed number history saves 30 calls per registered cellular phone.
Chapter Using hands-free phoning 12 4 Touch [Call] to make a call. To cancel the call after the system starts dialing, touch . 5 Touch to end the call. Dialing a facility’s phone number You can check the details of the party before making a phone call. 4 Touch to end the call. You can make a call to facilities with phone number data. p You cannot make a call to locations or POIs that have no phone number data.
Chapter Using hands-free phoning 12 3 Touch [Call] to make a call. To cancel the call after the system starts dialing, touch . 4 Touch to end the call. Receiving a phone call You can perform hands-free answering by using the navigation system. Answering an incoming call The system informs you that it is receiving a call by displaying a message and producing a ring sound. If [Auto Answer Preference] is set to [Off], answer the call manually.
Chapter Using hands-free phoning Transferring the phone book 1 Connect the cellular phone that has the phone book to transfer. = For details, refer to Connecting a registered Bluetooth device on page 82. 2 Touch [Contacts Transfer] on the “Phone Menu” screen. 3 Check that the following screen is displayed, and operate your cellular phone to transfer the phone book entries. After transferring the data is finished, a message asking whether you want to transfer more data appears. 4 Touch [No].
Chapter 12 Using hands-free phoning 3 Touch [Bluetooth Settings]. The “Bluetooth Settings” screen appears. Editing the device name You can change the device name to be displayed on your cellular phone. (Default is [PIONEER NAVI].) 1 Display the “Bluetooth Settings” screen. 2 Touch [Device Name]. The keyboard to enter the name appears. 3 Touch to delete the current name, and enter the new name by using the keyboard.
Chapter Using hands-free phoning 12 1 Display the “Bluetooth Settings” screen. 2 Touch [Clear Memory]. The “Clear Memory” screen appears. 3 Touch the desired option. ! [Off]: No automatic response. Respond manually ! [Immediately]: Answers immediately ! [After 3 seconds]: Answers after three seconds ! [After 6 seconds]: Answers after six seconds ! [After 10 seconds]: Answers after ten seconds Setting the automatic rejection function 1 Display the “Bluetooth Settings” screen.
Chapter 12 Using hands-free phoning 1 Insert an SD memory card into the SD card slot. = For more details of the operation, refer to Inserting and ejecting an SD memory card on page 31. 2 Display the “Bluetooth Settings” screen. 3 Touch [Firmware update]. The current version is displayed. 4 Touch [Firmware update]. Update starts. Notes for hands-free phoning General notes ! Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
Chapter Using hands-free phoning 12 Phone book transfers ! If there are more than 1 000 phone book entries on your cellular phone, all entries may not be downloaded completely. ! With some cellular phones, it may not be possible to transfer all items in the phone book at one time. In this case, transfer items one by one from your cellular phone. ! Depending on the cellular phone, this navigation system may not display the phone book correctly.
Chapter Customizing preferences 13 The options in the “Navi Settings” menu Indicates the connection status of the GPS antenna, the reception sensitivity, and from how many satellites the signal is received. Displaying the “Navi Settings” screen 1 Press the HOME button to display the “Top Menu”. 2 Touch [Settings]. The “Settings Menu” screen appears. 3 Touch [Navi Settings]. The “Navi Settings” menu appears.
Chapter Customizing preferences 6 1 2 7 3 4 5 1 Speed The speed detected by the navigation system is indicated. (This indication may be different from the actual speed of your vehicle, so please do not use this instead of the speedometer.) 2 Acceleration or deceleration/Rotational speed Acceleration or deceleration velocity of your vehicle is indicated. Also, rotational speed when your vehicle turns to left or right is shown. 3 Distance Driving distance is indicated.
Chapter Customizing preferences 13 Using the “Gas Mileage” function ! [Gas Unit]: Set the fuel unit. ! [Currency]: Set the unit of currency. Inputting the fuel consumption information for calculating the fuel cost You can estimate the fuel cost to your destination by entering the fuel consumption information in the navigation system. 1 Display the “Navi Settings” screen. 2 Touch [Gas Mileage]. The “Gas Mileage Setting” screen appears. 3 Enter the fuel consumption information.
Chapter Customizing preferences 13 = For more details of the operation, refer to Inserting and ejecting an SD memory card on page 31. 2 4 Enter the following settings: ! [Distance]: Enter the distance traveled since the previous fueling. p The distance is entered automatically only when the distance traveled since the previous fueling is recorded. ! [Gas Pumped]: Enter the amount of fuel pumped. ! [Gas Price Per Unit]: Enter the fuel unit price.
Chapter Customizing preferences 13 ! [On]: You can export your track log to the SD memory card. ! [Off] (default): You cannot export your track log to the SD memory card. # Touch [Type]. Each time you touch the key changes that setting. ! [Private] (default): Set the track log attribute to “Private”. ! [Business]: Set the track log attribute to “Business”. ! [Other]: Set the track log attribute to “Other”.
Chapter Customizing preferences 3 Touch [System Settings]. The “System Settings” screen appears. 5 Touch the desired language. After the language is selected, the screen returns to the previous screen. 6 Touch [OK] on the “Regional Settings” screen. A message confirming whether to restart the navigation system appears. 7 Touch [OK]. The navigation system restarts. # Press the MODE button or the HOME button. Cancels the setting of the languages. Customizing preferences 2 Touch [Settings].
Chapter Customizing preferences 13 Summer time setting is off by default. Touch [Summer Time] to change the setting if you are in the summer time period. 5 Touch [Time format]. Each time you touch the key changes that setting. ! [12H] (default): Changes the display to 12-hour format with am/pm. ! [24H]: Changes the display to 24-hour format. Changing the unit between km and miles This setting controls the unit of distance and speed displayed on your navigation system.
Chapter Customizing preferences ! p p 5 To finish the setting, touch [OK]. p Splash screen images should be used within the following formats; — BMP or JPEG files — Allowable horizontal and vertical size are 2 592 pixels x 1 944 pixels or smaller — Allowable data size is 6 MB or smaller p Proper compatibility with allowable files is not guaranteed. p Imported original images will be stored in the built-in memory, but the ability to save these images cannot be guaranteed completely.
Chapter Customizing preferences 13 Rear view camera The navigation system features a function that automatically switches to the full-screen rear view camera image installed on your vehicle. When the shift lever is in the REVERSE (R) position, the screen automatically switches to full-screen rear view camera. Camera for Rear view mode [Rear View] can be displayed at all times (e.g. when monitoring an attached trailer, etc.) as a split screen where map information is partially displayed.
Chapter Customizing preferences 13 The illumination color can be selected from 11 different colors. Furthermore, the illumination color can be switched between these 11 colors in order. To set the illumination color, display the “Illumination Color” screen. 1 Display the “System Settings” screen. 2 Touch [Illumi Color]. The “Illumination Color” screen appears. Selecting the color from the preset colors 1 Display the “Illumination Color” screen. 2 Touch the color you want.
Chapter Customizing preferences 13 1 Insert an SD memory card into the SD card slot. = For more details of the operation, refer to Inserting and ejecting an SD memory card on page 31. 2 Press the HOME button to display the “Top Menu”. 3 Touch [Settings]. The “Settings Menu” screen appears. 4 Touch [Setting Replicator]. A message confirming whether to update the settings appears. 5 Touch [Yes]. Update starts.
Chapter Using the radio (FM) Using the touch panel keys 1 % Touch [FM] on the “AV Source” menu to display the “FM” screen. 2 = For details concerning operations, refer to Screen switching overview on page 36. 3 4 Reading the screen 1 23 4 56 1 Display the “Function” menu Using the radio (FM) You can listen to the radio by using the navigation system. This section describes operations for radio (FM). 14 = For details, refer to Using the “Function” menu on the next page.
Chapter 14 Using the radio (FM) Switching between the detailed information display and the preset list display 2 The next time you touch the same preset tuning key [P1] to [P6], the radio station frequencies are recalled from memory. p You can also use [c] and [d] to recall radio stations assigned to preset tuning keys [P1] to [P6]. You can switch the left side of the basic screen according to your preference. Using the “Function” menu 1 Touch [FM] on the “AV Source” menu to display the “FM” screen.
Chapter Using the radio (FM) 14 Using the radio (FM) 2 Touch [Start] to start “BSM”. BSM begins to flash. While BSM is flashing, the six strongest broadcast frequencies will be stored under the preset tuning keys [P1] to [P6] in order of their signal strength. When this is complete, BSM stops flashing. p To cancel the storage process, touch [Stop]. p Storing broadcast frequencies with BSM may replace broadcast frequencies you have already saved by using [P1] to [P6].
Chapter 15 Using the radio (AM) You can listen to the radio using this navigation system. This section describes operations for radio (AM). % Touch [AM] on the “AV Source” menu to display the “AM” screen. = For details concerning operations, refer to Screen switching overview on page 36. Reading the screen 1 23 4 56 1 Source icon Shows which source has been selected. 2 LOCAL indicator Shows when local seek tuning is on.
Chapter Using the radio (AM) Storing and recalling broadcast frequencies 1 Storing the strongest broadcast frequencies = For details, refer to this page. 2 Tuning in strong signals = For details, refer to this page. Storing the strongest broadcast frequencies “BSM” (best stations memory) lets you automatically store the six strongest broadcast frequencies under the preset tuning keys [P1] to [P6] and, once stored there, you can tune in to these frequencies with the touch of a key.
Chapter 16 HD RadioäReception You can listen to the radio by using the navigation system. This section describes operations for HD Radio reception. p For details concerning operation, refer to the HD Radio tuner’s operation manual. Using the touch panel keys 1 % Touch [Digital Radio] on the “AV Source” menu to display the “Digital Radio” screen. 2 3 = For details concerning operations, refer to Screen switching overview on page 36.
Chapter HD RadioäReception Switching between the detailed information display and the preset list display 16 2 The next time you touch the same preset tuning key [P1] to [P6], the radio station frequencies are recalled from memory. p You can also use [c] and [d] to recall radio stations assigned to preset tuning keys [P1] to [P6]. You can switch the left side of the basic screen according to your preference. Desired information can be displayed. % Touch [Disp].
Chapter 16 HD RadioäReception = For details, refer to this page. 3 Tuning in strong signals = For details, refer to this page. 4 Switching the reception mode = For details, refer to this page. Storing the strongest broadcast frequencies “BSM” (best stations memory) lets you automatically store the six strongest broadcast frequencies under the preset tuning keys [P1] to [P6] and, once stored there, you can tune in to these frequencies with the touch of a key. % Touch [Start] to turn BSM on.
Chapter Playing audio CDs 17 You can play a normal music CD using the built-in drive of the navigation system. This section describes how. 1 Insert the disc you want to play into disc-loading slot. Playback starts from the first track of the CD. 2 Touch [Disc] on the “AV Source” menu to display the “CD” screen. 3 Use the touch panel keys on the screen to control the disc. Reading the screen 1 2 3 45 6 7 8 9 1 Source icon Shows which source has been selected.
Chapter Playing audio CDs 17 Touching [p] skips to the start of the next track. Touching [o] once skips to the start of the current track. Touching it again will skip to the previous track. Fast reverse or forward Touch and hold [o] or [p] to fast reverse or fast forward. p Fast reverse stops when it reaches the beginning of the first track on the disc. p You can also perform these operations by using TRK (c/d) button.
Chapter Playing music files on ROM You can play a disc that contains compressed audio files using the built-in drive of the navigation system. This section describes these operations. p In the following description, the MP3, WMA, AAC files are collectively referred to as “Compressed audio file”. 1 Insert the disc you want to play into disc-loading slot. Playback starts from the first file of the ROM. = For details concerning operations, refer to Screen switching overview on page 36.
Chapter 18 Playing music files on ROM Using the touch panel keys All of the songs in the disc can be played at random by touching only one key. p If the disc contains a mixture of various media file types, all tracks within the current part (“CD” or “ROM”) are played randomly. p To cancel random play, switch [Random] to [Off] on the “Function” menu. 1 2 3 4 5 1 Display the “Function” menu = For details, refer to Using the “Function” menu on this page.
Chapter Playing music files on ROM 2 Touch 1 . 2 3 4 Touching [Scan] switches between [On] and [Off]. When you find the track you want, touch [Scan] to turn scan play off. p After completion of track or folder scanning, normal playback of the tracks will begin again. p If you turn [Scan] to [On] when the repeat play range is set to [Track], the repeat play range changes to [Folder] automatically.
Chapter 19 Playing a DVD-Video You can play a DVD-Video using the built-in drive of the navigation system. This section describes operations for playing a DVD-Video. Using the touch panel keys Playback screen (page1) 1 Reading the screen 1 2 3 4 2 56 3 4 5 6 7 8 9 Playback screen (page2) 1 7 8 9 ab 1 Source icon Shows which source has been selected. 2 Title number indicator Shows the title number currently playing. 3 Chapter number indicator Shows the chapter currently playing.
Chapter Playing a DVD-Video You can display the menu by touching [Menu] or [Top Menu] while a disc is playing. Touching either of these keys again lets you start playback from the location selected from the menu. For details, refer to the instructions provided with the disc. 3 Skip forward or backward Touching [p] skips to the start of the next chapter. Touching [o] once skips to the start of the current chapter. Touching it again will skip to the previous chapter.
Chapter 19 Playing a DVD-Video % Touching [BookM.]: You can bookmark one point for each of up to five discs. If you try to memorize another point for the same disc, the oldest bookmark will be overwritten by the newest one. p To clear the bookmark on a disc, touch and hold [BookM.]. Searching for a specific scene and starting playback from a specified time You can search for the scene you want by specifying a title or a chapter, and the time.
Chapter Playing a DVD-Video 1 Touch [a], [b], [c] or [d] to select the desired menu item. 2 Touch [Enter]. Playback starts from the selected menu item. The way to display the menu differs depending on the disc. # Touch [Position]. Each touch of [Position] changes the display position of touch panel keys. # Touch [Hide]. The touch panel keys are hidden. And is displayed, so you can select a menu item by touching the screen. p To return to normal playback, touch [f].
Chapter 19 Playing a DVD-Video p If you perform chapter (title) search, fast forward, fast reverse or slow motion playback, the repeat play range changes to “Disc”. p This function is not available when disc playback has been stopped. 2 Selecting audio output When playing DVDs recorded with LPCM audio, you can switch the audio output. Touch [L/R Select] repeatedly until the desired audio output appears in the display.
Chapter Playing a DVD-VR disc You can play a DVD-VR (DVD Video Recording Format) disc using the built-in drive of the navigation system. This section describes operations for DVD-VR discs. 20 Using the touch panel keys Playback screen (page1) 1 2 Reading the screen 1 2 3 4 3 4 56 5 6 7 8 9 a Playback screen (page2) 7 8 9 a 1 Source icon Shows which source has been selected. 2 Title number indicator Shows the title number currently playing.
Chapter Playing a DVD-VR disc 20 6 7 8 9 a b Touching [f] switches between playback and pause. Switch the display Touching [Disp] changes the information as follows: Disc information display — Repeat range display Hide the touch panel keys Touching [Hide] hides the touch panel keys. Touch anywhere on the LCD screen to display the touch panel keys again. Display the title list Displays the title list recorded on the disc.
Chapter Playing a DVD-VR disc Switch the playback mode 20 2 Touch the title to play from the list. You have two methods for playing DVD-VR discs; Original (original) and Playlist (playlist). p Titles created with DVD recorders are called original. Those based on original, rearranged titles are called playlist. Playlists are created on DVD-R/-RW discs. % Touch [Mode Change] to switch the play mode. If the play mode is changed, playback starts from the beginning of the selected play mode.
Chapter Playing a DVD-VR disc 20 Using the “Function” menu 1 Touch [Disc] on the “AV Source” menu to display the “DVD-VR” screen. = For details concerning operations, refer to Screen switching overview on page 36. 2 Touch the screen to display the touch panel keys. 3 Touch .
Chapter Playing a DivX video You can play a DivX disc using the built-in drive of the navigation system. This section describes that operations. 21 Using the touch panel keys Playback screen (page1) 1 Reading the screen 1 2 3 4 56 2 3 4 5 6 7 8 9 Playback screen (page2) 1 8 9 a 1 Source icon Shows which source has been selected. 2 Folder number indicator Shows the folder number currently playing. 3 File number indicator Shows the file number currently playing.
Chapter 21 Playing a DivX video Touching [p] skips to the start of the next file. Touching [o] once skips to the start of the current file. Touching again will skip to the previous file. Frame-by-frame playback p You can also perform these operations by using the TRK (c/d) button. % Touch [r] during playback. Each time you touch [r], you move ahead one frame. To return to normal playback, touch [f]. 4 Playback and Pause Touching [f] switches between playback and pause.
Chapter Playing a DivX video 2 Touch the keys to input the target number or time and then touch [Enter]. For time (time search) ! To select 5 minutes 03 seconds, touch [5], [min], [0], [3] and [Enter] in order. ! To select 71 minutes 00 seconds, touch [7], [1], [min], [0], [0] and [Enter] in order. ! To select 100 minutes 05 seconds, touch [1], [0], [0], [5], [s] and [Enter] in order. p To cancel an input number, touch [Clear]. To cancel the input numbers, touch and hold [Clear].
Chapter DVD-Video, DVD-VR, DivX setup 22 Configure the DVD-Video/DVD-VR/DivX player. Displaying DVD/DivX® Setup menu 3 Touch the desired language. When you select [Others], a language code input display is shown. Input the four digit code of the desired language then touch [Enter]. = Refer to Language code chart for DVDs on page 133. p If the selected language is not recorded on the disc, the default language specified on the disc is output and displayed.
Chapter DVD-Video, DVD-VR, DivX setup 2 Touch [TV Aspect].
Chapter DVD-Video, DVD-VR, DivX setup 22 1 Display the “DVD/DivX® Setup” screen. = For details, refer to Displaying DVD/DivX® Setup menu on page 130. 2 Touch [Auto Play]. Touching [Auto Play] switches this setting between [On] and [Off]. p When [Auto Play] is set to [On], the repeat range is automatically set to [Disc]. Setting the subtitle file for DivX You can select whether to display DivX external subtitles or not.
Chapter DVD-Video, DVD-VR, DivX setup 22 Language code chart for DVDs Language (code), input code Guarani (gn), 0714 Gujarati (gu), 0721 Hausa (ha), 0801 Hindi (hi), 0809 Croatian (hr), 0818 Hungarian (hu), 0821 Armenian (hy), 0825 Interlingua (ia), 0901 Interlingue (ie), 0905 Inupiak (ik), 0911 Indonesian (in), 0914 Icelandic (is), 0919 Hebrew (iw), 0923 Yiddish (ji), 1009 Javanese (jw), 1023 Georgian (ka), 1101 Kazakh (kk), 1111 Greenlandic (kl), 1112 Cambodian (km), 1113 Kannada (kn), 1114 Kashmiri (k
Chapter 23 Playing music files (from USB or SD) You can play the compressed audio files stored in the external storage device (USB, SD). p In the following description, the SD memory card and USB memory device are collectively referred to as the “external storage device (USB, SD)”. If it indicates the USB memory device only, it is referred to as the “USB storage device”. refer to the manual supplied with the USB storage device. 1 Source icon Shows which source has been selected.
Chapter Playing music files (from USB or SD) 9 Current file number and total number of files Shows the file number currently played and the total number of playable audio files. a Track title indicator Shows the title of the track currently playing (when available). p If the title of a track is not available, the file name appears. b Artist name indicator* Shows the artist name currently playing (when available). c Album title indicator* Shows the title of the album for the current track (when available).
Chapter Playing music files (from USB or SD) 23 3 Touch the track you want to play. p To cancel the list screen, touch [Detail]. Using the “Function” menu 1 Touch [USB] or [SD] on the “AV Source” menu to display the “USB” or “SD” screen. = For details concerning operations, refer to Screen switching overview on page 36. 2 Touch 1 .
Chapter Playing video files (from USB or SD) You can play the video files stored in the external storage device (USB, SD). p In the following description, the SD memory card and USB memory device are collectively referred to as the “external storage device (USB, SD)”. If it indicates the USB memory device only, it is referred to as the “USB storage device”. Starting procedure 1 Insert the SD memory card into the SD card slot or plug the USB storage device into the USB connector.
Chapter Playing video files (from USB or SD) 24 Touching [p] skips to the start of the next file. Touching [o] once skips to the start of the current file. Touching again will skip to the previous file. Fast reverse or forward Touch and hold [o] or [p] to fast rewind or fast forward. p There is no sound on fast reverse or forward. p You can also perform these operations by using the TRK (c/d) button. 5 Playback and Pause Touching [f] switches between playback and pause.
Chapter Playing video files (from USB or SD) 24 Using the “Function” menu 1 Touch [USB] or [SD] on the “AV Source” menu to display the “USB” or “SD” screen. = For details concerning operations, refer to Screen switching overview on page 36. 2 Touch the screen to display the touch panel keys. 3 Touch . p If the touch panel keys are not shown, touch anywhere on the screen to display them.
Chapter 25 Using an iPod (iPod) Using the USB interface cable for iPod enables you to connect your iPod to the navigation system. p A USB interface cable for iPod (CD-IU50V) (sold separately) is required for connection. Starting procedure % Connect your iPod. The source changes and then playback will start. = For details, refer to Connecting your iPod on page 33. p If the iPod is already connected, touch [iPod] on the “AV Source” menu.
Chapter Using an iPod (iPod) 25 2 3 4 1 5 6 7 8 1 Album artwork Touch the key to enlarge the album artwork. If you touch again, the artwork returns to its normal size. 2 Category tabs Shows the list to narrow down the songs. If you want to use the list of “Audiobooks”, “Composers” or “Songs”, touch [MENU] to display the lists. 3 Display the “Function” menu = For details, refer to Using the “Function” menu on page 144.
Chapter Using an iPod (iPod) 25 p Touching [All] on the list includes all options in the current list. For example, if you touch [All] after touching [Artists], you can proceed to the next screen with all artists in the list selected. p After you select Artists, Albums, or Genres, go on to touch one of the list to start playing the first songs in the selected list and display the next options. # Touch and hold the item that you want to refine. Plays back the files related to the touched item.
Chapter Using an iPod (iPod) 25 If you touch and hold [o] or [p] for five seconds, fast reverse/fast forward continues even if you release either of these keys. To resume playback at a desired point, touch [f], [o] or [p]. 5 Touch the screen to display the touch panel keys. = For more details of the operation, refer to Using the touch panel keys (Video) on this page. Using the touch panel keys (Video) 1 2 p You can also perform these operations by using the TRK (c/d) button.
Chapter Using an iPod (iPod) 25 Searching for applicable items alphabetically 2 Touch 1 . 2 3 4 Using the search control displays the page which includes the first applicable option. p This function is available for the alphabetical list only. 5 Search control 1 Touch the category you want. 2 Touch the item that you want to refine. 3 Touch [c] or [d] to select the character.
Chapter Using an iPod (iPod) 25 Using an iPod (iPod) ! On — Outputs the wide-screen video from iPod ! Off — Outputs the normal-sized video from iPod p Display size is changed after you change “Widescreen” setting and select the video to play. p This setting is available only during the video operation. 5 Setting iPod control mode While the control mode is set to “iPod”, you can operate iPod function from the connected iPod.
Chapter 26 Using the Bluetooth audio player You can control the Bluetooth audio player featuring Bluetooth wireless technology. p Before using the Bluetooth audio player, you need to register and connect the device to this navigation system. = For more details of the operation, refer to Chapter 11.
Chapter Using the Bluetooth audio player Using the “Function” menu Meaning All Repeat All audio files in the current Bluetooth audio player are played repeatedly. This is the default condition. Track Repeat Track Repeat Random Random The current file is played repeatedly. All audio files in the current Bluetooth audio player are played in random order. = For more information, refer to Using the “Function” menu on this page.
Chapter 27 Using the XM tuner You can use the navigation system to control an XM satellite digital tuner, which is sold separately. For details concerning operation, refer to the XM tuner’s operation manuals. This section provides information on XM operations with the navigation system which differs from that described in the XM tuner’s operation manual.
Chapter Using the XM tuner 27 % Touch [XM] on the “AV Source” menu to display the “XM” screen. = For details concerning operations, refer to Screen switching overview on page 36. ALL CH MODE 1 2 3 4 5 67 8 9 CATEGORY MODE 1 2 a 4 Selecting an XM channel directly 5 You can select an XM channel directly by entering the desired channel number. 67 8 9 1 Memorize the current song = For details, refer to Memorizing the song on the next page.
Chapter Using the XM tuner 27 2 Input [000] and then touch [Enter]. If you select another channel, display of the Radio ID is canceled. 2 Touch the desired channel that you want to listen to. Storing and recalling broadcast stations With a touch of any of the preset tuning keys ([P1] to [P6]), you can easily store up to six broadcast channels for later recall (also with the touch of a key). 1 Select the channel that you want to store in memory. 2 Touch [Preset] to display the preset list.
Chapter Using the XM tuner p You can customize the setting for the memorized songs later. = For more details concerning the operation, refer to Setting the memorized songs on the next page. 27 Tuning in to the memorized channel % Touch [Traffic]. When the memorized song is broadcast A beep sounds, and a message is displayed. Touch [Yes] to switch to that station and listen to that track.
Chapter Using the XM tuner 27 Setting the memorized songs Selecting the songs to alert The list of song titles memorized for the MyMix Function (MyMix list) is displayed. You can change the notification setting when the song is broadcast again. You can enable or disable notification for each song. 1 Touch [Memo Edit]. 2 Touch the song title that you want to disable notification for. The check mark is removed, and the notification setting of the song is deactivated.
Chapter Using the SIRIUS tuner 3 Preset number indicator Shows what preset item has been selected. 4 SIRIUS channel number indicator Shows the SIRIUS channel number that the tuner is tuned to. 5 Current time 6 SIRIUS channel select mode indicator Shows what channel select mode has been selected. You can select a channel from all channels in ALL CH MODE, and select a channel from the selected category in CATEGORY MODE. = For details, refer to Switch the SIRIUS channel select mode on the next page.
Chapter 28 Using the SIRIUS tuner You can select a channel within a selected category that you operate this function. 9 Select a SIRIUS channel directly = For details, refer to Selecting a SIRIUS channel directly on this page. a Switch the SIRIUS display Each touch of [Disp] changes the display information. Channel number — Channel name — Channel category — Artist name/feature — Song/program title — Composer b Switch the channel category Touch [c] or [d] to select the desired category.
Chapter Using the SIRIUS tuner 28 p You cannot memorize a song that does not have song title and artist name information. p You cannot memorize the song title or the artist name of channel “000”. p The memorized title may not be displayed correctly. Storing and recalling broadcast stations With a touch of any of the preset tuning keys [Preset 1] to [Preset 6], you can easily store up to six broadcast stations for later recall (also with the touch of a key). 2 Touch [Preset] to display the preset list.
Chapter Using the SIRIUS tuner 28 Using the “Instant Replay” function 2 The “Instant Replay” function allows you to replay the stored broadcast on Pioneer SIRIUS BUS INTERFACE (if Pioneer SIRIUS BUS INTERFACE capable for this function). As soon as you tune to a channel, Pioneer SIRIUS BUS INTERFACE automatically begins storing the broadcast. It can store approximately up to 44 minutes previous (depending on the selected channel and the memory capacity of Pioneer SIRIUS BUS INTERFACE).
Chapter Using the SIRIUS tuner 1 2 28 Touch [Memo Edit]. team selection is not possible. In this case, first delete the team selection and then try again. Touch [Alert]. p Touch to toggle the selection. Deleting the memorized songs 1 Touch [Memo Edit]. 2 Touch [c Prev] or [Next d] to select the song title that you want to delete. 3 Touch [Delete] when the song you want to delete is displayed. A message will appear asking you to confirm the deletion. 4 Touch [Yes].
Chapter 29 Using AV input You can display “video image” output by AV1 Input or AV2 Input to the screen of the navigation system. For details of the connection method, refer to “Installation Manual”. Using the touch panel keys % Touch the screen to display the touch panel keys. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, you must stop in a safe place and apply the parking brake.
Chapter Using the external unit (EXT1, EXT2) Reading the screen 1 2 3 4 1 Source icon Shows which source has been selected. 2 External unit indicator Displays the information that is sent by connected external units. 3 Auto/Manual mode indicator Shows the current mode. 4 Current time Using the touch panel keys % Touch [EXT1] or [EXT2] on the “AV Source” menu to select the external unit. 1 2 3 4 5 1 Send a band command Touch to send a band command to the external unit.
Chapter 31 Other functions — The “Video image” and sound are output only when the appropriate setting on [AV1 Input] or [AV2 Input] are [Video]. Selecting the video for “Rear display” You can choose either to show the same image as the front screen or to show the selected source on the “Rear display”. % Touch [Rear Screen] on the “AV Source” menu.
Chapter Other functions 31 Other functions p The adjustments of Brightness and Contrast are stored separately when your vehicle’s headlights are off (daytime) and when your vehicle’s headlights are on (nighttime). These are switched automatically depending on whether the vehicle’s headlights are on or off. p The adjustments of Dimmer is stored separately when your vehicle’s headlights are off (daytime) and when your vehicle’s headlights are on (nighttime).
Chapter 32 Customizing preferences Options on the “AV System Settings” menu Displaying the “AV System Settings” menu 1 Press the HOME button to display the “Top Menu”. 2 Touch [Settings]. The “Settings Menu” screen appears. 3 Touch [AV Settings]. The “AV System Settings” menu appears. Setting video input 2 (AV2) You can switch this setting according to the connected component. p This setting applies to RCA inputs (AUDIO INPUT and VIDEO INPUT) on the back of the system.
Chapter Customizing preferences 32 Setting the rear output % Touch [Wide Mode] on the “AV System Settings” menu. The navigation system’s rear output can be used for a full-range speaker or subwoofer connection. If you switch Rear SP to Sub. W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the navigation system is set for a rear full-range speaker connection (Full).
Chapter 32 Customizing preferences — When the navigation outputs the guidance voice. — When you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). — When the voice recognition mode is activated. ! Tel/VR — The volume is muted or attenuated according to the following conditions — When you use a cellular phone via Bluetooth technology (dialing, talking, incoming call). — When the voice recognition mode is activated.
Chapter Customizing preferences 32 p Once the cataloging is completed, you can deactivate [VR Catalog Menu] until you update the content/data on iPod. If you update the iPod data, activate [VR Catalog Menu] again to transfer the music information and synchronize the music information for voice commands with the data on iPod. p After you select “Off” in [VR Catalog Mode], the system doesn’t catalog the data on the iPod. In such case, the previously cataloged data are available as voice commands.
Chapter 32 Customizing preferences p You cannot make adjustments in the following situations: — AV source is [Off] — During muting/attenuation p You cannot select [SLA] when the FM tuner is selected as the AV source. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Touch [FAD/BAL] on the “AV Sound Settings” menu. = For details, refer to Displaying the “AV Sound Settings” menu on the previous page. When [Sub.
Chapter Customizing preferences 1 Touch [EQ] on the “AV Sound Settings” menu. = For details, refer to Displaying the “AV Sound Settings” menu on page 165. 2 Touch the equalizer you want. You can adjust the effect of the preset equalizer curves. The following equalizer curves can be adjusted: ! Super Bass ! Powerful ! Natural ! Vocal 1 Touch [EQ] on the “AV Sound Settings” menu. = For details, refer to Displaying the “AV Sound Settings” menu on page 165.
Chapter 32 Customizing preferences Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Touch [Loudness] on the “AV Sound Settings” menu. = For details, refer to Displaying the “AV Sound Settings” menu on page 165. 2 Touch [Loudness] to select the level you want.
Chapter Customizing preferences 3 Touch [+] or [–] to adjust the source volume. +8dB to –8dB is displayed as the source volume is increased or decreased. The following AV sources are set to the same source level adjustment volume automatically. ! ! ! ! ! ! p 32 2 DVD-V and DVD-VR CD, ROM, DivX EXT1 and EXT2 AV1 and AV2 SD and USB XM and SIRIUS The different source volume level can be set between iPod and USB. The “Bass Booster” enhances bass sounds, which can be muted by driving noise.
Chapter Operating Your Navigation System with Voice 33 To Ensure Safe Driving CAUTION For your safety, avoid viewing the screen in the voice operation as much as possible while driving. If you use voice operation, select [US English] in [Voice Language] of “Language”. If you select other languages, voice operation will not be available. 6 The requested operation will be carried out. p The voice operation may not be operable for a minute after the navigation system has booted up.
Chapter Operating Your Navigation System with Voice 2 Press the VOICE button to activate voice operations. A list of commands for voice operation appears. After a message, the beep indicates that the system is ready to accept your voice command. Say a command after this beep. 3 Say “I need directions”. A message prompting you to select a search by address or by POI appears. 33 5 Say a command according to the message displayed on the screen.
Chapter 33 Operating Your Navigation System with Voice 3 Say “iPod” on the selection screen to switch the AV source to iPod. p Touching the item on the screen also enables you to select the desired AV source. 4 Press the VOICE button to activate voice operations. 5 Say “Play the album Pioneer” to playback the album name “Pioneer”. If the command is recognized properly, playback starts from the first song of “Pioneer”.
Chapter Operating Your Navigation System with Voice 33 Voice commands and operations Play artists d Displays the artist list d Say the artist name that you want to play. Play the artist d Starts playback from the top of the selected artist. Play albums d Displays the album list d Say the album name that you want to play. Play the album d Starts playback from the top of the selected album. Play playlists d Displays the playlist d Say the playlist that you want to play.
Chapter 33 Operating Your Navigation System with Voice Voice operation for AV source (other than iPod) AV source selection Voice commands and operations Change Source to DISC d Switches the AV source to Disc. Change Source to FM d Switches the AV source to FM. Change Source to AM d Switches the AV source to AM. Change Source to XM Satellite Radio d Switches the AV source to XM. Change Source to SIRIUS Satellite Radio d Switches the AV source to SIRIUS.
Chapter Operating Your Navigation System with Voice 33 Voice commands related to hands-free phoning p You can make a phone call by voice dialing if the cellular phone featuring Bluetooth wireless technology is being paired with the navigation system. p For shown on the following chart, say the name of the entry stored in “Contacts”. p For shown on the following chart, say the desired phone number.
Chapter 33 Operating Your Navigation System with Voice Tips for Voice Operation For your voice commands to be correctly recognized and interpreted, ensure that conditions are suitable for recognition. Close the vehicle windows Please note that wind through the vehicle window or miscellaneous noise from outside the vehicle can interfere with voice operation. Position the microphone carefully For optimum pick-up, the microphone should be fixed at a suitable distance directly in front of the driver.
Chapter Other functions 34 Setting the anti-theft function Entering the password You can set a password for the navigation system. If the back-up lead is cut after the password is set, the navigation system prompts for the password at the time of next boot up. On the password input screen, you must enter the current password. If you enter an incorrect password three times, the screen is locked and operations using touch panel keys are disabled.
Chapter Other functions 34 Restoring the default setting Resets various settings registered to the navigation system and restores them to the default or factory settings. p Some data remains. Be sure to read Returning the navigation system to the default or factory settings first. 1 Display the “System Settings” screen. = For details, refer to Displaying the “System Settings” screen on page 98. 2 Touch [Restore Factory Settings]. The message confirming whether to restore the settings appears.
Chapter Other functions 34 Setting items to be deleted The items to be deleted vary depending on the reset method. The items listed in the following table return to the default or factory settings. p Almost all items not listed below will be retained. However, some of the items to be returned to their default values are not listed if the setting value can be easily recovered by user, such as the last map scale, the last status of AV operation screen, etc. — : The setting will be retained.
Chapter 34 Other functions Navigation functions Method 1 Method 2 Method 3 Method 4 [Phone Menu] menu All settings — 1 1 1 Other functions Anti-theft password — — — — AV functions Method 1 Method 2 Method 3 Method 4 Volume 1 — — — [AV Settings] All settings 1 — — — [AV Sound] All settings 1 — — — Function menu of each AV source All settings 1 — — — [Picture Adjustment] 1 — — — Tilt 1 — — — Other functions 180 En
Appendix Appendix Troubleshooting If you have problems operating your navigation system, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Problems with the navigation screen Symptom Cause The power doesn’t turn on. The Leads and connectors are incornavigation system doesn’t oper- rectly connected. ate. The fuse is blown.
Appendix Appendix Symptom Cause Action (Reference) You cannot position your vehicle Something covers the GPS antenna. Do not cover the GPS antenna with spray on the map without a significant paint or vehicle wax, because this may block positioning error. the reception of GPS signals. Snow buildup can also degrade the signals. Signals from the vehicle’s speed Check that the cables are properly connected. pulse are not being picked up prop- If necessary, consult the dealer that installed erly. the system.
Appendix Appendix Symptom Cause Action (Reference) “Rear display” picture disappears. The source disc being listened to in the navigation system has been ejected. Before ejecting the disc, switch the source. This problem may occur when certain connection methods are used. There is a problem with the “Rear Check the “Rear display” and its connection. display”, for example a faulty wiring connection. An AV source that cannot output to the rear display is selected.
Appendix Appendix Symptom Cause Action (Reference) No sounds are produced. The volume level will not rise. Cables are not connected correctly. Connect the cables correctly. The system is performing still, slow There is no sound during still, slow motion, or motion, or frame-by-frame playback frame-by-frame playback with DVD-Video. with DVD-Video.
Appendix Appendix Problems with the phone screen Symptom Cause Action (Reference) Dialing is not possible because the touch panel keys for dialing are inactive. Your phone is out of range for service. Retry after re-entering the range for service. The connection between the cellular Perform the connection process. phone and the navigation system cannot be established now. If the screen becomes frozen... Park your vehicle in a safe place, and turn off the engine.
Appendix Appendix Messages and how to react to them The following messages may be displayed by your navigation system. Refer to the table below to identify the problem, then take the suggested corrective action. There are occasions when you may see error messages other than those shown here. In such a case, follow the instructions given on the display. Messages and how to react to them 186 Message Cause Route calculation was not possible. Route calculation has failed be! Change the destination.
Appendix Appendix Message Cause Connection failed. The cellular phone’s Bluetooth wire- Activate the target phone’s Bluetooth wireless technology is turned off. less technology. Action (Reference) The cellular phone is paired (connected) with another device. Cancel the pairing (connection) and retry. Rejection has been received from the cellular phone. Operate the target phone and accept the connection request from the navigation system.
Appendix Appendix Messages for audio functions When problems occur with AV source playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. The messages in “( )” will appear on the “Rear display”. Built-in DVD drive Message Cause Action (Reference) Reading error (ERROR-02-XX) Dirty Clean the disc.
Appendix Appendix Message Cause Cannot play back all tracks All the files on the inserted external Store playable files. storage device are secured by DRM. All of the files cannot be played by this unit. USB flash drive was disconnected for device protection. Do not connect this USB flash drive to the unit. To restart USB, restart the unit. Replace it with the playable file. (Page 199) The USB connector or USB cable is Confirm that the USB connector or USB short-circuited.
Appendix Appendix Positioning technology Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio signals giving time and position information. This ensures that signals from at least three can be picked up from any open area on the earth’s surface. The accuracy of the GPS information depends on how good the reception is.
Appendix Appendix Map matching As mentioned, the positioning systems used by this navigation system are susceptible to certain errors. Their calculations may, on occasion, place you in a location on the map where no road exists. In this situation, the processing system understands that vehicles travel only on roads, and can correct your position by adjusting it to a nearby road. This is called map matching.
Appendix Appendix Conditions likely to cause noticeable positioning errors For various reasons, such as the state of the road you are traveling on and the reception status of the GPS signal, the actual position of your vehicle may differ from the position displayed on the map screen. ! If you make a shallow turn. ! If you drive in zigzags. ! If the road has a series of hairpin bends. ! If there is a parallel road. ! If there is a loop or similar road configuration.
Appendix Appendix ! If you are on a steep mountain road with many height changes. ! If trees or other obstacles block the GPS signals for a considerable period. ! If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. ! If you drive very slowly, or in a start-andstop manner, as in a traffic congestion. ! If your vehicle is turned on a turntable or similar structure. ! If you join the road after driving around a large parking lot.
Appendix Appendix CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only information about traffic regulations applicable at the time when the route was calculated is considered. One-way streets and street closures may not be taken into consideration.
Appendix Appendix Built-in drive and care ! Use only conventional, fully circular discs. Do not use shaped discs. ! Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the built-in drive. ! Do not touch the recorded surface of the discs. ! Store discs in their cases when not in use. ! Avoid leaving discs in excessively hot environments including under direct sunlight. ! Do not attach labels, write on or apply chemicals to the surface of the discs.
Appendix Appendix Playing DualDisc ! DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. ! Playback of the DVD side is possible with this navigation system. However, since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this navigation system. ! Frequent loading and ejecting of a DualDisc may result in scratches to the disc.
Appendix Appendix CD-R/CD-RW discs Common notes about the external storage device (USB, SD) ! Do not leave the external storage device (USB, SD) in any location with high temperatures. ! Depending on the kind of the external storage device (USB, SD) you use, this navigation system may not recognize the storage device or files may not be played back properly. ! The text information of some audio and video files may not be correctly displayed. ! File extensions must be used properly.
Appendix Appendix Handling guidelines and supplemental information ! This system is not compatible with Multi Media Card (MMC). ! Copyright protected files cannot be played back. Notes specific to DivX files ! Only DivX files downloaded from DivX partner sites are guaranteed for proper operation. Unauthorized DivX files may not operate properly. ! DRM rental files cannot be operated until playing back is started. ! The navigation system corresponds to a DivX file display of up to 1 590 minutes 43 seconds.
Appendix Appendix Media compatibility chart General Media CD-R/-RW DVD-R/-RW/-R DL USB storage device File system ISO9660 level 1, ISO9660 level 2, Romeo and Joliet ISO9660 level 1, ISO9660 level 2, Romeo, Joliet and UDF 1.
Appendix Appendix WAV compatibility Media CD-R/-RW DVD-R/-RW/-R DL File extension SD memory card .wav Format Sampling frequency USB storage device Linear PCM (LPCM), IMA-ADPCM WAV files on the CD-R/-RW, DVD-R/-RW/-R DL cannot be played. LPCM: 16 kHz to 48 kHz IMA-ADPCM: 22.05 kHz and 44.1 kHz LPCM: 8 bits and 16 bits MS ADPCM: 4 bits Quantization bits Note: The sampling frequency shown in the display may be rounded. AAC compatibility DVD-R/-RW/-R DL Media CD-R/-RW File extension .
Appendix Appendix DivX compatibility DVD-R/-RW/-R DL Media CD-R/-RW File extension .avi/.divx Profile (DivX version) Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/ Ver. 6.x Compatible audio codec MP3, Dolby Digital Bit rate (MP3) 8 kbps to 320 kbps (CBR), VBR Sampling frequency (MP3) 16 kHz to 48 kHz (32 kHz, 44.
Appendix Appendix Common notes Example of a hierarchy ! The navigation system may not operate correctly, depending on the application used to encode WMA files. ! Depending on the version of Windows Media™ Player used to encode WMA files, album names and other text information may not be correctly displayed. ! There may be a slight delay when starting playback of audio files encoded with image data. ! The navigation system is not compatible with packet write data transfer.
Appendix Appendix Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for cellular phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprising Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2 000 companies worldwide.
Appendix Appendix DivX is a compressed digital video format created by the DivX video codec from DivX, Inc. This unit can play DivX video files recorded on CD-R/RW/ROM and DVD-R/RW/ROM discs. Keeping the same terminology as DVD video, individual DivX video files are called “Titles”. When naming files/titles on a CD-R/RW or a DVD-R/RW disc prior to burning, keep in mind that by default they will be played in alphabetical order. For U.S.A. DivX® is a registered trademark of DivX, Inc.
Appendix Appendix iPhone ! Do not push the LCD screen with excessive force as this may scratch it. ! Never touch the LCD screen with anything besides your finger when operating the Touch panel functions. The LCD screen can scratch easily. Liquid crystal display (LCD) screen “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.
Appendix Appendix ! The product lifetime of the LED backlight is more than 10 000 hours. However, it may decrease if used in high temperatures. ! If the LED backlight reaches the end of its product lifetime, the screen will become dimmer and the image will no longer be visible. In that case, please consult your dealer or the nearest authorized PIONEER Service Station.
Appendix Appendix Display information Destination Menu Phone Menu Page Page [Address] 57 [Dial Pad] 84 [Return Home] 59 [Call Home] 85 [Contacts] 85 [Contacts Transfer] 89 [Received Calls] 85 [Dialed Calls] 86 [POI] [Gas Station] [ATM] 60 [Hotel] [Spell Name] 60 [Near Me] 60 [Near Destination] 61 [Around City] 61 [AVIC FEEDS] 62 [Favorites] 61, 64 [History] 62, 67 [Cancel Route] 56 [MSN Direct] 68 [Coordinates] 62 [Route Overview] 54 [Missed Calls] 86 [GOOG-411]
Appendix Appendix System Settings menu Navi Settings menu Page Page 208 [Connection Status] 94 [3D Calibration Status] 94 [Gas Mileage] 96 [Drive Log Settings] 97 [Demo Mode] 98 [Set Home] 98 [Modify Current Location] 98 En [Regional Settings] [Program Language], [Voice Language] 99 [Time] 99 [km / mile] 100 [Speed] [Volume] 100 100 [Splash Screen] 101 [Back Camera] 101 [Screen Calibration] 102 [Illumi Color] 103 [Service Information] 103 [Restore Factory Settings] 178
Appendix Appendix Map Settings menu AV System Settings menu Page [Displayed Info] Page 162 [AV2 Input] 162 [City Map] 44 [ANT CTRL] 162 [City Map Barrier] 44 [Wide Mode] 163 [Show Traffic Incident] 45 [Rear SP] 163 [Bluetooth Connected] 45 [Mute] 163 [Current Street Name] 45 [Mute Level] 164 [Favorites Icon] 45 [Guidance/Tel SP] 164 [3D Land Mark] 45 [VR Catalog Menu] 164 [Show Manuever] 45 [DivX VOD] 165 [MSN Direct] 46 [Quick Access Selection] 49 [Overlay POI] 4
Appendix Appendix AV Sound Settings menu Bluetooth Settings menu Page 210 Page [FAD/BAL] ([Balance]) 166 [Connection] 82 [EQ] 166 [Registration] 79 [Loudness] 168 [Device Name] 90 [Sub Woofer] 168 [Password] 90 [HPF] 168 [Bluetooth On/Off] 90 [SLA] 168 [Echo Cancel] 90 [Bass Booster] 169 [Auto Answer Preference] 90 [Staging] 169 [Refuse All Calls] 91 En [Clear Memory] 91 [Firmware update] 91
Appendix Appendix Glossary AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and atmosphere. Bit rate This expresses data volume per second, or bps units (bits per second).
Appendix Appendix ID3 tag This is a method of embedding track-related information in an MP3 file. This embedded information can include the track title, the artist’s name, the album title, the music genre, the year of production, comments and other data. The contents can be freely edited using software with ID3 Tag editing functions. Although the tags are restricted by the number of characters, the information can be viewed when the track is played back.
Appendix Appendix Parental lock Some DVD-Video discs with violent or adult-oriented scenes feature parental lock which prevents children from viewing such scenes. With this kind of disc, if you set the unit’s parental lock level, playback of scenes inappropriate for children will be disabled, or these scenes will be skipped. Phone book An address book on user’s phone is collectively referred to as “Phone book”.
Appendix Appendix Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 10.8 V to 15.1 V DC) Grounding system ................... Negative type Maximum current consumption ........................................... 10.0 A Dimensions (W × H × D): Chassis ............................... 178 mm × 100 mm × 165 mm (7 in. × 3-7/8 in. × 6-1/2 in.) Nose ..................................... 170 mm × 96 mm × 17 mm (6-3/4 in. × 3-3/4 in. × 5/8 in.) Weight ....................
Appendix Appendix Dynamic range ......................... 95 dB (1 kHz) (CD: 94 dB (1 kHz)) Distortion ..................................... 0.008 % (1 kHz) Output level: Video .................................... 1.0 Vp-p/75 W (±0.2 V) Audio ................................... 1.0 V (1 kHz, 0 dB) Number of channels .............. 2 (stereo) MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3 WMA decoding format ......... Ver.9.0 L3 AAC decoding format ............
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.