Manualshelf

Use and Care Manual

ManualsBrandsPIP ManualsFlame Resistant CoverallsMen's Medium Navy Cotton/Nylon AR/FR Dual Certified Coveralls with 2-Pockets and Hook and Loop Closure, 9.2 cal/cm 2
1234
PROTECTIVE INDUSTRIAL PRODUCTS, INC.
www.pipusa.com
PIP
®
Flame Resistant Garments
USER INFORMATION GUIDE
2
For maximum protection, flame resistant collars must be worn closed, and sleeves and cus must be worn down
and secured. Be aware that additional garments or personal protective equipment (PPE) may be required for
complete protection.
Do not use this garment if it is soiled, damaged, or contaminated. Ensure that you clean this garment in accordance
with the guidelines contained in this document. Please contact customer service if you have any questions.
WARNING: ENSURE YOU ARE TRAINED IN RECOGNIZING THE HAZARDS WITHIN YOUR TRADE. EVEN WHEN USED AS
DIRECTED, THIS GARMENT DOES NOT, UNDER ALL CIRCUMSTANCES, OFFER BURN INJURY PROTECTION OR PREVENT
EXPOSURE TO HAZARDS. NOT UNDERSTANDING THE LIMITATIONS OF THIS GARMENT MAY RESULT IN A SERIOUS
INJURY AND/OR DEATH.
c. Marking Recommendations and Restrictions
The application of non-flame or non-heat resistant emblems (patches, embroidery, silkscreens, heat transfers,
etc.) to the garment may compromise garment safety and should be avoided where possible. If used, the size
should not exceed that of a credit card.
When marking your garment, ensure you:
▶ use an industrial laundry marker and mark the inside only
▶ do not mark through certification markings
▶ do not remove any safety or cleaning labels
d. Warranty Information
All PIP FR garments are covered by a limited warranty from date of purchase. Please refer to the PIP Warranty
Information laid out in the PIP Printed Price List for further information. You must follow all care requirements for
laundering. Garments must be clean and properly maintained and repaired. Garment warranty does not extend to
neglect, abuse, normal wear/tear or exposure to substances or hazards for which the garments are not intended.
2. PREPARATIONS FOR USE
a. Sizing / Adjustment
Size selection should maximize the function of the wearer without impeding upon movement. It should not be
tight or loose. Significant alterations to the garment are not permitted as the protective qualities of the garment
may be compromised.
THIS SIZING CHART INDICATES THE RANGE OF KEY WEARER MEASUREMENTS THAT ARE
ACCOMMODATED BY EACH SPECIFIC SIZE OF GARMENT, SHROUD/HOOD/BALACLAVA, GLOVE OR
RAINWEAR. For accurate sizing, refer to the charts below. Garments should not impede upon movement or be
too loose or too tight to ensure wearer comfort and safety.