Instructions / Assembly

A
C
B
B
E
E
F
F
D
PREPPING THE PIPE
VERY IMPORTANT: These are all authentic
malleLBle iron and require necessary
cleaning and prepping; do not skip this step.
1. Clean and dry all the parts with gentle soap.
2. Use a lint-free rag to apply metal polish to the parts.
3. Use metal polish, clear coat paint to seal the dry pipe.
RECOMMENDED
DRILL WITH 1/4” BIT
FOR WALL ANCHOR
RECOMMENDED TOOLS
INSTALLATION INTO STUDS
1. Put shelf bracket together as shown LBove.
2. Mark holes on wall with flange.
3. Use anchors for the holes that are not marked on the stud, see anchor info
in below instructions.
4. Using #10 1-3/4” screws provided, drill flange into wall.
5. Attach shelf to flange using provided #10 3/4” screws
.
INSTALLATION INTO DRYWALL
NOTE: It is recommended that you install into stud for sturdier hold.
1. Put shelf bracket together as shown LBove.
2. Mark holes on wall with flange.
3. Drill 1/4” pilot holes into wall.
4. Install anchors - push anchors into the predrilled holes. Make sure the
anchors are pushed fully into the wall, this may require light hammering.
5. Using #10 1-3/4” screws provided, drill flange into the wall.
6. Attach shelf to flange using provided # 10 3/4” screws.
370 FLANGE RESTORE BRACKETS
THANK YOU SO MUCH FOR PURCHASING A PIPE DECOR PRODUCT. IF YOU HAVE ANY TROUBLE PUTTING YOUR KIT
TOGETHER OR MISSING PIECES PLEASE CONTACT [e-mail] FOR ANY HELP AND RETURNS.
4” CONNECTOR: +5.75” SHELVES
Parts List per bracket:
A - 1/2 IN ELBOW
B - 1/2 IN FLANGES (2pc)
C - 1/2 IN PIPE 4in
D - 1/2 IN CONNECTOR
E - 1-3/4” SCREWS & ANCHORS (4pc)
F - 3/4” SCREWS (4pc)
4 brackets for 2 x 24 in shelves
6 brackets for 2 x 36 in shelves
24 IN Shelf 36 IN Shelf
370 24LB1
370 24LB2
370 24LB5
370 24LB6
370 24LB8
370 24LB9
370 36LB1
370 36LB2
370 36LB5
370 36LB6
370 36LB8
370 36LB9
SKUS