Instructions

D2/F

C1/C2

ROUND BACK TV

(UNIVERSAL MONITOR PLATE)

First, make sure the diameter of the bolt(D1-F) ﬁts your TV. Then, please see the

diagram above. You will need to thread the bolt into the TV using the washer (B) and

spacer (C1 or C2) if necessary with a screwdriver(Not included). Please make sure the

monitor brackets[02] are vertically centered and level with each other.

Step 3

STEP 3A

For wood stud installation, follow STEP 3A

For concrete installation, follow STEP 3B

Attach Wall Plate to Wall

Wood Stud Option

WARNING:

Ensure the wall plate is securely fastened to the wall

before continuing on to the next step.

● Drywall covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum

1½ x 3½ in. (38 x 89 mm)

● Stud center must be veriﬁed

WARNING:

Avoid potential personal injury or property damage! DO NOT

over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until the

washers [A2] are pulled ﬁrmly against the wall plate

[01]