Installation Instructions

- 13 -
PROTECH PIRAMID XL3
1. Turn the “Test Mode” switch to the ON position to change to Settings mode.
2. Set the sensitivity to maximum (code selector set to 9).
3. Set the maximum distance beyond which the PIRAMID XL3 should not detect.
Note: On the two code selectors, setting 0 is reserved for rereading the value memorized in the
detector. (See §7.3 Reading the parameters of the PIRAMID XL3: "READ" Mode)
Code selector
value
Distance
1 16.4 ft / 5 m
2 33 ft / 10 m
3 49 ft / 15 m
4 66 ft / 20 m
5 82 ft / 25 m
6 98 ft / 30 m
7 115 ft / 35 m
8 131 ft / 40 m
9 147 ft / 45 m
Code selector
sensitivity setting
Code selector setting
Max. distance