Installation Instructions

- 15 -
PROTECH PIRAMID XL3
6. Turn the "Test Mode" to the OFF position to switch to detection mode.
7. Close the cover.
8. In normal operation, the LEDs are off.
It is possible to activate them via smartphone application (see §8.2).
Note: “INTRUSION” and "MASKING” relays remain in alarm status when the "Test Mode"
switch is in the ON position.
7.2 Anti-masking alarm
The alarm is triggered when an obstacle
obstructs the masking sensor located in the
upper cover.
(The masking alarm is triggered approximately
15s after the obstacle has been located)
Anti-masking sensor