Installation Instructions

- 20 -
PROTECH PIRAMID XL3
3. PIRAMID XL3 settings
MW range: Modification of the maximum detection range of the MW .
MW sensitivity: Modification of the detection sensitivity of the MW .
Max. speed: Modification of the maximum speed to detect of the MW .
Makes it possible to filter objects for which the speed is superior to the “Speed max.” .
Distance of movement: Modification of the maximum distance an object has to move before the MW
detects it .
Minimum distance of movement that an object has to move in the same
direction before triggering an alarm .
PIR sensitivity:
Modification of the detection sensitivity of the PIR .
Legend:
Enable Disable
Sensor ejected Sensor not ejected
MW Sensitivity settings
1 : Not very sensitive 9 : Very sensitive
MW Range settings
1 : 16 ft / 5 m 9 : 148 ft / 45 m
Relay outputs enabled / disabled
MW ejection
PIR ejection
Antimask enabled / disabled
Buzzer enabled / disabled
LEDS enabled / disabled
Moving direction:
Settings save above
MW and PIR settings save
PIR Sensitivity settings:
1 : Not very sensitive 81 : Very sensitive
Max. speed settings:
0.62 to 31 mph / 1 to 50 km/h
Distance to be covered settings
:
0.33 to 16 ft / 0.1 to 5m