Installation Instructions
- 26 -
PROTECH PIRAMID XL3
12 PRODUCT REFERENCES
•
SDI-78XL3-A range 98x98ft / 30x30m white ref: 60760301
•
SDI-78XL3-B range 98x33ft / 30x10m white ref: 60760302
•
SDI-78XL3-C range 131x19.7ft / 40x6m white ref: 60760303
•
SDI-78XL3-D range 131x9.8ft / 40x3m white ref: 60760304
•
SDI-78XL3-A PET range 98x98ft / 30x30m white ref: 60760305
•
SDI-78XL3-B PET range 98x33ft / 30x10m white ref: 60760306
•
SDI-78XL3-C PET range 131x19.7ft / 40x6m white ref: 60760307
•
SDI-78XL3-A range 98x98ft / 30x30m gray anthracite ref: 60760401
•
SDI-78XL3-B range 98x33ft / 30x10m gray anthracite ref: 60760402
•
SDI-78XL3-C range 131x19.7ft / 40x6m gray anthracite ref: 60760403
•
SDI-78XL3-D range 131x9.8ft / 40x3m gray anthracite ref: 60760404
•
SDI-78XL3-A PET range 98x98ft / 30x30m gray anthracite ref: 60760405
•
SDI-78XL3-B PET range 98x33ft / 30x10m gray anthracite ref: 60760406
•
SDI-78XL3-C PET range 131x19.7ft / 40x6m gray anthracite ref: 60760407
•
SDI-78XL3-H range 98ft x 85ft / 30x26m white ref: 60760308
•
SDI-78XL3-H20 range 98ft x 9.8ft / 30x3m white ref: 60760309
•
SDI-78XL3-H40 range 98ft x 23ft / 30x7m white ref: 60760310
•
SDI-78XL3-H60 range 98ft x 46ft / 30x14m white ref: 60760311
•
SDI-78XL3-H range 98ft x 85ft / 30x26m gray anthracite ref: 60760408
•
SDI-78XL3-H20 range 98ft x 9.8ft / 30x3m gray anthracite ref: 60760409
•
SDI-78XL3-H40 range 98ft x 23ft / 30x7m gray anthracite ref: 60760410
•
SDI-78XL3-H60 range 98ft x 46ft / 30x14m gray anthracite ref: 60760411
Changes or modifications not expressly approved by PROTECH could void the user’s authority to
operate the equipment.
FCC Part 15 compliance statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception which can be determined by turning the equipment off and
on, the user is encouraged to try to correct interference by one or more of the following measures:
−
Reorient or relocate the receiving antenna.
−
Increase the separation between the equipment and receiver.
−
Connect the equipment into an outlet on circuit different from that to which the receiver is
connected.
−
Consult the dealer or an experienced radio/TV technician for help.