Manual

PMI Piranha
™
16
4. Grasp the block assembly and slowly begin to pull the bolt/hammer assembly out of the marker. Figure 11
5. When the bolt/hammer assembly is about halfway out, grasp it with one hand and continue to hold it intact
while removing it completely from the marker. Figure 12
LUBRICATION
It is recommended that a 100% synthetic oil, such as KC Trouble Free gun oil, be used for lubricating the marker.
1. Before each insertion of the removable power source (tank or remote line) into the ASA, clean the threads and
put two drops of oil onto them.
2. After removing the bolt/hammer assembly, put a drop of oil onto each o-ring. Put two drops of oil onto the
cocking rod. Put a drop of oil onto the bolt.
3. Before screwing the barrel onto the marker after removal, clean the barrel threads and put a drop of oil onto
the o-ring.
4. After removing the trigger frame, put a drop of oil onto the pivot points of the trigger and sear.
5. The valve and valve o-rings do not require oil.
Figure 13 Bolt-hammer assembly
removed.
Figure 11
Figure 12 Grasp assembly.