Manual

REASSEMBLY PROCEDURE

1. See Figures 15 through 23, which show the sequence of procedure for reassembly of the bolt/hammer assembly.

Once it is reassembled, hold the bolt/hammer assembly in one hand. Figure 24. Push it into the marker until it

stops sliding forward, which will be about halfway into the body of the marker. Figure 25.

2. Push the Sear Release Slide button forward. Figure 26. The Sear Release Slide button is located on the left side of

the marker near the top of the left grip panel. Continue to press assembly into marker. Pushing the button

allows the bolt/hammer assembly to slide easily the rest of the way into the

marker.

3. Align the ball in the field strip pin with the groove in the middle of the receiv-

er, and reinsert the field strip pin. Field strip pin must be inserted

into the left side of the marker! Figure 14

4. After reassembly, follow the procedures in this manual for adding power system,

loader, and paintballs.

MAINTENANCE OF THE PMI PIRANHA™

Figure 14

Safety First!

Always Wear

Goggles and Head

Protection Designed

For Paintball!

PMI Piranha

™