Manual

WARNING
DO NOT ATTEMPT TO PERFORM MAINTENANCE PROCEDURES UNLESS QUALIFIED TO DO SO.
THIS TROUBLESHOOTING GUIDE DOES NOT COVER ALL SITUATIONS AN INDIVIDUAL MAY ENCOUNTER. CONTACT PMI, INC.,
FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED PMI PIRANHA™ REPAIR FACILITIES.
PAINTBALL MARKER POWER SYSTEMS MUST BE REPAIRED OR REPLACED WITH THE CORRECT
PRESSURE RATED COMPONENTS.
AIR LEAK
Leak in pressure source between valve and cylinder Do not fill cylinder. Immediately take to qualified
personnel for inspection. Cylinder must be drained.
Leaks when power system is aired up Cock marker before powering up system.
Leaks at connection between ASA and tank Check o-ring at connection or on remote hose connector
Leaks at connection between braided air hose and fitting Requires disassembly of air hose assembly for repairs;
contact factory or factory authorized repair center
Leaks at body of marker or down the barrel Requires removal of valve and check of valve o-rings
Leaks at connection between Remove foregrip unit and check o-ring
gas-through foregrip & vertical ASA
PMI Piranha
™
21
TROUBLESHOOTING
WARNING
BEFORE DISASSEMBLY OF THE MARKER, REMOVE ALL PAINTBALLS FROM THE MARKER, BARREL, AND LOADER;
REMOVE POWER SOURCE; AND REMOVE ALL GAS OR AIR FROM THE POWER SYSTEM.