Manual

PMI Piranha

™

WARNING

All paintball markers must be chronographed regularly. Adjust marker to shoot paintballs at a velocity that is less

than 300 feet per second (fps) and that does not exceed the velocity limit set by the paintball park where the

marker is in use.

Chronograph the marker at regular intervals during the day, as well as any time the power source is refilled or

changed, any time the barrel or any part in the power system is changed, and upon request of any player or game

official.

1. Chronograph the marker using standard chronograph procedures and following safety rules. Shooting velocity will

vary based upon many factors.

2. Adjust velocity by using a

16" allen wrench to turn the velocity adjuster. Figure 6. Turn adjuster clockwise to raise

velocity. Turn adjuster counterclockwise to lower velocity. Figure 7. Turning the velocity adjuster changes the

amount of tension on the hammer spring. The hammer spring may be changed for additional velocity adjustment;

insert stiffer spring to raise velocity and less stiff spring to lower velocity (red spring is stiffer than blue spring).

Figure 7 Clockwise increases

velocity. Counterclockwise

reduces velocity.

Figure 6

allen

is used to adjust velocity.

V E L OCITY ADJUSTMENT ON THE PMI PIRA N H A ™

Increases

velocity

Decreases

velocity