User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com
135
Copyright @ 2015 Pepwave
21.6 SNMP
SNMPor simple network management protocol is an open standard that can be used to
collect information about the Pepwave router.SNMP configuration is located
atSystem>SNMP.
SNMP Settings
SNMP Device
Name
This field shows the router name defined atSystem>Admin Security.
SNMP Port
This option specifies the port which SNMP will use. The default port is 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2, click theAdd SNMP
Communitybutton in the Community Nametable, upon which the following screen is
displayed: