User's Manual

ManualsBrandsPismo Labs Technology ManualsElectronicsPepwave / Peplink / Pismo Wireless Product

Pepwave MAX and Surf User Manual

http://www.pepwave.com

WINS Servers

This option allows you to specify the Windows Internet Name Service (WINS) server. You

may choose to use the built-in WINS server or external WINS servers. When this unit is

connected using SpeedFusion

, other VPN peers can share this unit's built-in WINS server

by entering this unit's LAN IP address in their DHCP WINS Servers setting. Therefore, all

PC clients in the VPN can resolve the NetBIOS names of other clients in remote peers.If

you have enabled this option, a list of WINS clients will be displayed at Status>WINS

Clients.

BOOTP

Check this box to enable BOOTP on older networks that still require it.

Extended

DHCP Option

In addition to standard DHCP options (e.g. DNS server address, gateway address, subnet

mask), you can specify the value of additional extended DHCP options, as defined in RFC

2132. With these extended options enabled, you can pass additional configuration

information to LAN hosts.To define an extended DHCP option, click the Add button, choose

the option to define, and then enter its value. For values that are in IP address list format,

you can enter one IP address per line in the provided text area input control. Each option

can be defined once only.

DHCP

Reservation

This setting reserves the assignment of fixed IP addresses for a list of computers on the

LAN. The computers to be assigned fixed IP addresses on the LAN are identified by their

MAC addresses. The fixed IP address assignment is displayed as a cross-reference list

between the computers’ names, MAC addresses, and fixed IP addresses.

Name (an optional field) allows you to specify a name to represent the device. MAC

addresses should be in the format of 00:AA:BB:CC:DD:EE. Press to create a new

record. Press to remove a record.Reserved clients information can be imported from

the Client List, located atStatus>Client List. For more details, please refer to Section22.3.

To configure DHCP relay, first click the button found next to the DHCP Server option

to display the settings.

DHCP Relay Settings

Enable

Check this box to turn on DHCP relay. Click the icon to disable DHCP relay.

DHCP Server IP

Address

Enter the IP addresses of one or two DHCP servers in the provided fields. The DHCP

servers entered here will receive relayed DHCP requests from the LAN. For active-passive

DHCP server configurations, enter active and passive DHCP server relay IP addresses in

DHCP Server 1 and DHCP Server 2.

DHCP Option

DCHP Option 82 includes device information as relay agent for the attached client when

forwarding DHCP requests from client to server. This option also embeds the device’s MAC

address and network name in circuit and remote IDs. Check this box to enable DHCP

Option 82.

Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS

Server Settings, and DNS Proxy Settings as noted above.