User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

WAN Connection Settings

WAN

Connection

Name

Enter a name to represent this WAN connection.

Network Mode

Users have to specify the network they are on accordingly.

Routing Mode

This option allows you to select the routing method to be used in routing IP frames via the

WAN connection. The mode can be either NAT (network address translation) or IP

Forwarding. Click the button to enable IP forwarding.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the

DNS (Domain Name System) servers to be used when a DNS lookup is routed through this

connection.

Selecting Obtain DNS server address automatically results in the DNS servers assigned

by the PPPoE server to be used for outbound DNS lookups over the WAN connection.

(The DNS servers are obtained along with the WAN IP address assigned from the PPPoE

server.)

When Use the following DNS server address(es) is selected, you can enter custom DNS

server addresses for this WAN connection into the DNS server 1 and DNS server 2 fields.