User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com
8
Copyright @ 2015 Pepwave
 Bandwidth bonding and failover among selected WAN connections
 IPsec VPN for network-to-network connections (works with Cisco and Juniper
only)
 Ability to route Internet traffic to a remote VPN peer
 Optional pre-shared key setting
 SpeedFusion
TM
throughput, ping,and traceroute tests
 PPTP server
 PPTP and IPsec passthrough
3.1.4 Firewall
 Outbound (LAN to WAN) firewall rules
 Inbound (WAN to LAN) firewall rules per WAN connection
 Intrusion detection and prevention
 Specification of NAT mappings
 Outbound firewall rules can be defined by destination domain name
3.1.5 Captive Portal
 Splash screen of open networks, login page for secure networks
 Customizable built-in captive portal
 Supports linking to outside page for captive portal
3.1.6 Outbound Policy
 Link load distribution per TCP/UDP service
 Persistent routing for specified source and/or destination IP addresses per
TCP/UDP service
 Traffic prioritization and DSL optimization
 Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms
3.1.7 AP Controller
 Configure and manage Pepwave AP devices
 Review the status of connected APs
3.1.8 QoS
 Quality of service for different applications and custom protocols
 User group classification for different service levels
 Bandwidth usage control and monitoring on group- and user-level